Cam only LT1 makes 396 HP, record?
#141
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Look at the heads there running,the cam sizes, and the compression.............
That tells your story right there, poor setups
#144
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The reason why you dont see alot of nice number head n cam cars is this reason for LT1s
Moron LT1 owners like stroker motors with either BIG cams or some small junk ones with STOCK UNPORTED HEADS!
They also like to build low compression motors, yet put big cams in them "even the honda guys know better than that"
Spending money on oh so cool LT4 stuff becasue they think its best **** money can buy.
They buy trick flow heads and put them on stock bottom end motors.....
Some were along the lines mail order tunes became better than a real dyno tune for your car.
Buying cheap stalls for a auto to save a extra buck
MSD opti sparks and hytech power programers are what the cool kids on the block have.
And agian stroker motors with **** heads that make TPIs look like topend monsters.......
SPEND THE MONEY ON A REAL QAULITY HEAD N CAM PACKAGE!
Moron LT1 owners like stroker motors with either BIG cams or some small junk ones with STOCK UNPORTED HEADS!
They also like to build low compression motors, yet put big cams in them "even the honda guys know better than that"
Spending money on oh so cool LT4 stuff becasue they think its best **** money can buy.
They buy trick flow heads and put them on stock bottom end motors.....
Some were along the lines mail order tunes became better than a real dyno tune for your car.
Buying cheap stalls for a auto to save a extra buck
MSD opti sparks and hytech power programers are what the cool kids on the block have.
And agian stroker motors with **** heads that make TPIs look like topend monsters.......
SPEND THE MONEY ON A REAL QAULITY HEAD N CAM PACKAGE!
I concur, an LT1 CAN make great power with the right parts combo. I felt I made a few mistakes on my car when I did it last time. It runs a decent number but it could be better. But hundreds of 400hp H&C lt1's??????
#147
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Almost all the guys running those combos are at or over 400whp
Alot of people dont know this but thunder racing makes a couple nice LT1 grinds.
This should be a lession to all, if speed incs caddy cam can make over 320whp with a BONE STOCK CAR WITH CATS! That means you all need to re think your setups and who your buying your parts from.
#148
#149
9 Second Club
Join Date: Apr 2009
Location: Lake Tahoe, CA
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Has the 3 cars mentioned been on the dyno with the shot, if so what type of difference is seen in hp? I would guess well more then 75 due to the amount of air being pushed into the motor. Also, how is the nitrous set-up, through the turbo, into the motor directly or through the intake itself? I know this is pretty far off topic but I think that is where this thread is doomed to be anyways so I would liek to atleast gain some sort of knowledge from it.... Sorry Phil.
#153
9 Second Club
Join Date: Apr 2009
Location: Lake Tahoe, CA
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
#157
12 Second Club
iTrader: (18)
Join Date: Apr 2006
Location: Sarasota & Lee County
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It's a Nitrous Xpress N-Tercooler Sprayer kit. It uses a spray bar to spray nitrous directly on top of the intercooler fins. I have not dyno'd the car on the bottle, let alone made even one track pass on it. I have however played with it momentarily on the street, and i'll tell you one thing it feels like it spools much faster. My tuner Keith @ Force Fed Performance is going to put it on the dyno and do some adjustments to accommodate the spray.
#159
11 Second Club
iTrader: (15)
Join Date: Jun 2006
Location: San Antonio, Tx
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
idk if its possible to hit those numbers cam only on an LT1. I know my car with a 75shot of nitrous build enough power to smoke a Spec stage 2 clutch. I have the CC501 with crane 1.6rr's Stock heads and intake, stock injectors, fuel pressure regulator, NGK tr55 plugs, underdrive pullies, mid length hedders, Spec stage 2 clutch, 75 shot, 255lph fuel pump and a detroit tru track third member with stock 3.42 gears. Car went 12.2xx@114.5. it is still running the stock tune and i never got to dyno it b4 the clutch went out. the clutch was 6 months old. On my stock motor with a 52mm tb, underdrive pullies, and headers i threw 305 Hp and 326FLb with my ignition going out on the dyno.
You can see the mods list on my sig. the Nitrous was a 75 instead of 100.
You can see the mods list on my sig. the Nitrous was a 75 instead of 100.
#160
9 Second Club
Join Date: Apr 2009
Location: Lake Tahoe, CA
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)