My Motor is finally complete LE1.6, PICS
#22
11 Second Club
iTrader: (49)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Not lately, just got her off jackstands a week or so ago, been through some changes. I've now got a Nitrous Outlet plate sitting behind the TB, along with a chromoly cage, BMR K memberk, and a few other goodies. I've got to tie in my rear brakes (abs delete), mount my Kirkeys, get an alignment, before she's ready for the track...
#27
TECH Fanatic
Thread Starter
iTrader: (8)
Join Date: Jul 2005
Location: Memphis, TN
Posts: 1,105
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Honeslty I don't know the specs! haha Llyod and PCMforless does. This is what llyod sent me a while back:
"That is about like a CC 503 as far as duration goes but about .570 lift and a LSA below 110. It still operates from 2000-6300 RPM but has a choppier idle than a CC 503 and will make more mid range TQ and more top end power also."
I'm running the trickflow lt1 heads that flow 253/177 at 0.500" lift and a port matched intake.
the heads are milled to 53cc's to get me 11.5.1 compression ratio.
"That is about like a CC 503 as far as duration goes but about .570 lift and a LSA below 110. It still operates from 2000-6300 RPM but has a choppier idle than a CC 503 and will make more mid range TQ and more top end power also."
I'm running the trickflow lt1 heads that flow 253/177 at 0.500" lift and a port matched intake.
the heads are milled to 53cc's to get me 11.5.1 compression ratio.
#30
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Please post dyno numbers when you can as I'm about to build almost the exact same motor as yours, I also have the Manley forged lw ft pistons and Scat 6" procomp rods with a stock crank, home ported heads & intake (no flow numbers), Comp custom 230/230 - .560/.560 110 lsa cam, Comp 875 roller lifters (the good ones before they changed the retainer), Comp 1.6 rr's, Rollmaster double roller timing set, CSI ewp, Holley 58mm tb, 42# injectors, coated pacesetter LT's, and a Madz tune. I'm still in the process of gathering parts and getting the money for machine work but I'd at least have a ballpark idea of what kind of power I could expect from my combo.
#33
TECH Fanatic
Thread Starter
iTrader: (8)
Join Date: Jul 2005
Location: Memphis, TN
Posts: 1,105
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
stock lt1 intake manifold port matched, trickflow elbow, stock maf, slp cold air intake.
#39
TECH Enthusiast
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
No ****. Speed Inc's new setup is gorgeous and includes all new brackets, but I can not see spending $425 on it. I think the setup he has was only $150 when it was made.