LT1 Valve Covers!!!
Thread Starter
12 Second Club
iTrader: (15)
Joined: Mar 2007
Posts: 1,928
Likes: 0
From: Cheyenne, Wy
LT1 Valve Covers!!! I searched on here forever and havent found anything yet so I guess I will post here and see what happens....
Is there ANYONE who sells nice valve covers that will work on an LT1? I know we have to have that retarded notch on the pass side for the alternator...anyone besides GM and Canton make something for us? I would prefer something that's not "plain jane" if you know what I mean...I like my engine to look good and not be boring.
Is there ANYONE who sells nice valve covers that will work on an LT1? I know we have to have that retarded notch on the pass side for the alternator...anyone besides GM and Canton make something for us? I would prefer something that's not "plain jane" if you know what I mean...I like my engine to look good and not be boring.
I searched on here forever and havent found anything yet so I guess I will post here and see what happens....
Is there ANYONE who sells nice valve covers that will work on an LT1? I know we have to have that retarded notch on the pass side for the alternator...anyone besides GM and Canton make something for us? I would prefer something that's not "plain jane" if you know what I mean...I like my engine to look good and not be boring.
Is there ANYONE who sells nice valve covers that will work on an LT1? I know we have to have that retarded notch on the pass side for the alternator...anyone besides GM and Canton make something for us? I would prefer something that's not "plain jane" if you know what I mean...I like my engine to look good and not be boring.
Trending Topics
12 Second Club
Joined: Nov 2008
Posts: 121
Likes: 0
From: Winslow, In
any centerbolt valve covers would bolt to the head they dont have to say for LT1... unless there is clearance issues than you will have a problem... my block came out of a 96 tahoe and it has the vortec heads and same exact valve covers as my friends LT1... they used to have chrome ones at autozone around here
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo any centerbolt valve covers would bolt to the head they dont have to say for LT1... unless there is clearance issues than you will have a problem... my block came out of a 96 tahoe and it has the vortec heads and same exact valve covers as my friends LT1... they used to have chrome ones at autozone around here
TECH Fanatic
Joined: Jun 2007
Posts: 1,255
Likes: 11
From: centerville, ohio
Teching In
Joined: Jun 2009
Posts: 7
Likes: 0
From: Marengo IN
Here are some cheaper ones ...http://www.thunderracing.com/catalog...vid=4&pcid=110
I also found the fabbed cantons so I ordered them, they are more my style!
I also found the fabbed cantons so I ordered them, they are more my style!
Two passenger side ones rather, GM still has the passenger side LT4 covers just not the driver any more. So I have two passenger side covers on the car, just used two billet breathers from speedinc. You could use an oil cap just the same. Excuse the mess need to finish the car
