Okay guys im looking for a cam for my camaro its a 95
z28 with 100k miles. Some suspention mods but nothing
serious and the motor is mostly stock.

i dont know much about cams but im reading alot and
trying to learn so bare with me.
someone recomended a CC503, Comp 918 springs,
Comp 7/16 Pro Mag 1.6 NSA rr's, ARP 7/16 rocker arm studs,
TF guideplates, TF chromemoly pushrods.

would this be a good setup and is there anything els i need to
make this setup work.

thanks

 

That is a tried and true combo. That is said to be the best off the self cam for stock heads. The only thing you will need to ad to the list is a new timing set.

 

That is the exact same set up I have and I LOVE it!

As stated, a new timing set is a good idea.

Are you M6 or A4?

If A4 you will benefit a lot from a 3000+ stall and 3.73 gears.
If M6, 4.10's will make a big difference.

 

Its an a-4.
and i will look into getting a timing set and stall aswell.

ss.spl.ls1.
how much power did this setup make over stock.
also how much did all of these parts cost you.

thanks

 

Haven't dyno'd it yet but is "should" make ~350rwhp through a T56.

Comp Cam (CC503) $303
Comp 7/16" NSA Pro Mags $290
ARP 7/16" rocker arm studs $40
Trickflow guideplates $16
Trickflow 7.2" chromemoly pushrods $87
Crane 10308 dual valve spring kit $180

That's what I have. The Comp 26918's are a little for for the springs locks and retainers.

 

okay thanks for the help i think im on the right track now.

just a few more questions

where can i get a new timing set?
and what stall are you guys running?

 

gm replacement that i got at the stealership.

 

GM replacement timing set will do you fine.

'93-'97 crank sprocket: 10128346
'93-'94 cam sprocket: 10128349
'95-'97 cam sprocket: 10206039
chain: 10128485

Yank, Vig, or Edge stalls are the brands I would get. 3000+ stall rating.

I have seen several people recommend the Yank SS3600.
Add 3.73 gears to the stall and cam and your car will be a completely different car...