That was like a year ago Bro lol

 

It was right around 100 if I remember correctly. I do remember I had a 1.93 60 ft. - It felt real slow that day from mid track on...
I haven't spent a whole lot of time on line - so I'm not sure where the CO guys are???

 

Check out my times in sig. Thats a never rebuilt 147,000 mile long block with untouched heads and a hotcam kit. I would imagine you should be running runing alot faster than you are. Just my 2 cents.

 

Hey Im in the Springs...no track times with current combo, but should run low 11's

 

There's no doubt I've left some potential on the table. I am continuing to work things out and hopefully get to the low 13's or so. I plan to stay N/A for now. Your car seems to be running quite well- good job.

 

Hevent run yet, but plan to once i get 3.73's. What do you think i could see at bandi with my mods and 3.73's? And be nice! It's my dd so shes pretty tame lol.

 

My2kz28 Thats a nice setup you got there. 93TAJ.C. I would guess around a 15.0.

 

With your mods you should see bottom 13's high 12's

 

The little LT began life running 14's up here...
now she's flying hard with a best ET of 9.03
and a best MPH of 152.93
Last time out it went 9.16 at 147 with far less jet than last year; thanks to the help of Steve Johnson at Induction Solutions.

Even with the bottle most pick up a tenth or two just going to Vegas.

There are a few other LT's up here running some great numbers; 10's 11's. Maybe there just not on the site all that often.

 

Tell us about your engine Bro!

 

Stock-bottom end LT1/HOT cam/GTP heads/3.23 gears/3800 pounds/150 shot/hundreds of passes...11.4 at 118 mph. Drive it almost every day during the non-snowy months.

 

Do you remember What those gtp head flow clark?

 

Sorry missed your post.
388 cu
AFR RR heads
Bullet solid roller
950 Pro-Systems carb
Induction Solutions double cross bar plate 2 stage
Neil Chance conveter
Th400 RMVB
12 bolt/3:73
275/60/15 radial

 

Whats up. I'm hoping to run 9's next year after my new build.

TEA Trickflow heads
Vic Jr Intake
EFI Connection ECM
Solid Roller
22 lbs of boost
G-force 6 Speed
Spec custom Street twin clutch

 

I don't know where the flowsheet is, so I can't give you all the #s, but at
.500 lift it was 255 intake and high 190s exhaust.

 

Damn! so some AI or new trick flow 21 degree heads would probly pt you over 400rwhp with the hotcam

 

Not sure if you have seen this thread yet https://ls1tech.com/forums/lt1-lt4-m...info-pics.html