It fired! After cam swap
Thread Starter
TECH Senior Member
iTrader: (8)
Joined: Sep 2008
Posts: 5,130
Likes: 4
From: 6,000+ feet
It fired! After cam swap Well I guess I did something right.
Cranked it w the coil wire off til we got oil pres.
Hooked up coil wire and it fired first try.
I was disappointed because there was ZERO lope.
It was idling at 2K w the MAF off tho.
Plugged in the MAF and restarted and she dropped to 1000 and has a meaaannn lope!
The Borla carback tames it quite a bit but I'm sure it'll be really nasty when I get a cutout.
Cant wait to get the input swapped in the trans so I can drive it!
Cranked it w the coil wire off til we got oil pres.
Hooked up coil wire and it fired first try.
I was disappointed because there was ZERO lope.
It was idling at 2K w the MAF off tho.
Plugged in the MAF and restarted and she dropped to 1000 and has a meaaannn lope!
The Borla carback tames it quite a bit but I'm sure it'll be really nasty when I get a cutout.
Cant wait to get the input swapped in the trans so I can drive it!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo Thread Starter
TECH Senior Member
iTrader: (8)
Joined: Sep 2008
Posts: 5,130
Likes: 4
From: 6,000+ feet
Lol ya I know I dont want it to lope at 2K. I just didnt realize it was that high til I walked around and looked at the tach.
And yeah, no bent, broken pushrods, no bent valves, etc... Guess those 2 little dots lined themselves up in there or something.
Oh, and 65psi oil pres cold. Guess I didnt bang up the cam bearings too bad.
And yeah, no bent, broken pushrods, no bent valves, etc... Guess those 2 little dots lined themselves up in there or something.
Oh, and 65psi oil pres cold. Guess I didnt bang up the cam bearings too bad.
Thread Starter
TECH Senior Member
iTrader: (8)
Joined: Sep 2008
Posts: 5,130
Likes: 4
From: 6,000+ feet
Thanks guys.
Here's a vid
http://www.youtube.com/watch?v=aZelEnPl9vY
and one of my truck when I left the shop just for the hell of it
http://www.youtube.com/watch?v=21vodQHtnVs
Here's a vid
http://www.youtube.com/watch?v=aZelEnPl9vY
and one of my truck when I left the shop just for the hell of it
http://www.youtube.com/watch?v=21vodQHtnVs
