I bought my old 93 Z28 back, now it needs some TLC
#843
Thread Starter
Joined: Nov 2007
Posts: 1,929
Likes: 1
From: Chelsea, Michigan
3.42s are already in
Quick lca question.
When installing the lca relocation brackets the big round weight like looking thing bolted on the e brake system is in the way. Is it needed? There is one on each side.
Quick lca question.
When installing the lca relocation brackets the big round weight like looking thing bolted on the e brake system is in the way. Is it needed? There is one on each side.
#844
I've never had them get in the way of any of mine. ??? I actually just installed a pair of lca's and relo brackets on my Formula yesterday. Maybe post up a pic or two for us? Have you looked at pics of others after install?
#845
Thread Starter
Joined: Nov 2007
Posts: 1,929
Likes: 1
From: Chelsea, Michigan
Guy on local thread said he had to cut down a bit. The passenger side was close but it cleared. Maybe I need to readjust my phb.
I just popped them off in the mean time.
#847
I don't think adjusting your PHB will help because you will be moving your whole rear side to side. The distance from your brake parts to your lower control arm mounts (and relocation brackets) will remain the same. Might help those big 11" wheels clear better though. I'd trim them just enough to clear like someone else suggested.
#848
Thread Starter
Joined: Nov 2007
Posts: 1,929
Likes: 1
From: Chelsea, Michigan
Picked up the new used interior today!
- charcoal carpet
- trunk carpet
- hatch plastics
- rear cargo area plastics
- large quarter panel plastics
- dome light
- loaded door panels.
The only thing I didn't get was the kickpanels (sold already), but, since I have an extra set I'm going to see if I can match the interior.
They are all in charcoal and in MINT condition.
Hopefully be able to swap most over tonight.
Anyone need some freshly painted door panel bezels and switch plates?
- charcoal carpet
- trunk carpet
- hatch plastics
- rear cargo area plastics
- large quarter panel plastics
- dome light
- loaded door panels.
The only thing I didn't get was the kickpanels (sold already), but, since I have an extra set I'm going to see if I can match the interior.
They are all in charcoal and in MINT condition.
Hopefully be able to swap most over tonight.
Anyone need some freshly painted door panel bezels and switch plates?
#850
That would be your brake weights. When I did mine, the driver side fit perfect but had to grind some off the passenger side. Mine were UMI and in the directions it said up to 1/4 in. may need to be grind off.
#851
Thread Starter
Joined: Nov 2007
Posts: 1,929
Likes: 1
From: Chelsea, Michigan
Thanks fellas.
Interior swap begins!
Got it mostly back together lastnight. Relized I had a lot more gray parts than I thought. Still need seatbelts.
Still need to do the hatch plastics, doam light, seats and belts. Hopefully pick up some belts from Sean this weekend. Needs a god cleaning too!
Interior swap begins!
Got it mostly back together lastnight. Relized I had a lot more gray parts than I thought. Still need seatbelts.
Still need to do the hatch plastics, doam light, seats and belts. Hopefully pick up some belts from Sean this weekend. Needs a god cleaning too!
#853
Thread Starter
Joined: Nov 2007
Posts: 1,929
Likes: 1
From: Chelsea, Michigan
Thanks I hope it all pays off one day
Just about done with the interior swap.
New belt, looks gray with flash.
Hatch carpet was one of the biggest improvements. My was pretty worn.
All that is really left is figuring out what I want to do with the seats. I don't want to spend an arm and leg for a set. I think my best bet will be to get mine recovered.
Just about done with the interior swap.
New belt, looks gray with flash.
Hatch carpet was one of the biggest improvements. My was pretty worn.
All that is really left is figuring out what I want to do with the seats. I don't want to spend an arm and leg for a set. I think my best bet will be to get mine recovered.
#854
i know 6le bucket seats are prestty reasonably priced, maybe save up a little bit then get those, 500 for the basic cloth or synthetic leather set i believe? i know one day ill have to replace my carpet once i turn the car into a garage queen, my daughter left a pretty nasty cranberry juice stain on the back carpet and seat haha
#855
Nice choice with the interior. I'm swapping mine to LS1 ebony right now. Also, the reason I found this thread is because I was actually about to pop in my ebony carpet. I'm trying to remove the rear seat belt buckles but it appears you have to get at them from the underside of the car? The bolt just keeps spinning. Really annoying, honestly.. because I'm not even going to use the rear seat belts.
Great build, BTW. I read the whole thread.
Great build, BTW. I read the whole thread.
#857
Nice choice with the interior. I'm swapping mine to LS1 ebony right now. Also, the reason I found this thread is because I was actually about to pop in my ebony carpet. I'm trying to remove the rear seat belt buckles but it appears you have to get at them from the underside of the car? The bolt just keeps spinning. Really annoying, honestly.. because I'm not even going to use the rear seat belts.
Great build, BTW. I read the whole thread.
Great build, BTW. I read the whole thread.
#859
Thread Starter
Joined: Nov 2007
Posts: 1,929
Likes: 1
From: Chelsea, Michigan
Nice choice with the interior. I'm swapping mine to LS1 ebony right now. Also, the reason I found this thread is because I was actually about to pop in my ebony carpet. I'm trying to remove the rear seat belt buckles but it appears you have to get at them from the underside of the car? The bolt just keeps spinning. Really annoying, honestly.. because I'm not even going to use the rear seat belts.
Great build, BTW. I read the whole thread.
Great build, BTW. I read the whole thread.
Thanks! I will, still have a few things on the list before spring yet.