daniel6718

iTrader: (36)

only vid i got and wasnt the fastest pass...racing a 408 trans am with greg good heads and single plain intake with and elbow and plate....i think it was on a 200 shot...and it makes 475+ on motor...its got a th400 and a 9 inch

weve got a 306 cam only lt1 with stock head and intake...single stage nx nozzel kit 4l60-e stock 10 bolt with 3.42 and drove to the track

i knew his car made over 200 horsepower then we did and i tried to cut a light...i went a -.004...he had 5 mph on me too

this is a 3370 raceweight


http://www.youtube.com/watch?v=LlsOf_oxZgA

airfix

iTrader: (30)

NIce pass. What were the times for you and the TA on that run?

green94z

iTrader: (6)

Thats my lt1. We ran a 6.8 @ 102 and 1.49 60ft

daniel6718

iTrader: (36)

the ta went a 6.55 at 106

robsquikz28

iTrader: (246)

Thats atleast a 10.3x pass if the bottle stays good but other wise it will probably run in the 10.5x

355z28

iTrader: (8)

what shot are you running?

CamaroRacing12

iTrader: (5)

thats haulin. what was the hit?

daniel6718

iTrader: (36)

possible id say more of a 10.5 on that one...funny part it we went faster later in the day...and were still having trouble 60' what we want

da wasnt so great either..we were down about 2-3 mph

myltwon

iTrader: (1)

what convertor you running?

flyinZ

iTrader: (15)

Nice run! Dude, those stands were packed,lol.

CamaroRacing12

iTrader: (5)

any info on the setup????

daniel6718

iTrader: (36)

cc306
stock motor besides that
ewp
longtubes
cold air
60-e built with yank 3600
stock rear
lcas tq arm
draglites
no ac heater or bumper supports
6 pt cage

myltwon

iTrader: (1)

damn, I bet some gears and maybe a little more weight reduction and you could be looking at 6.50's

TAEnvy

iTrader: (2)

man too bad the 306 is such a shitty cam.

You not gonna fess up to the size of the hit? 200?
I must say thats gettin it done on a cam and spray stock bottom end car, congrats.

robsquikz28

iTrader: (246)

you know at times I dont believe that run I know someone has a completely gutted car, 3000 stall and stock 10 bolt 3.23 gear and 150 shot and only ran 11.0x....That was with a 1.5 60ft too. Thats completely gutted so atleast a 200# lighter than you right now + whatever you weigh compared to his weight. I dont know anyone who has ever ran bone stock cam only a 150 shot LT1 in the 10s and I know a lot of Lt1 peeps, but never seen that. but idk..lol

CamaroRacing12

iTrader: (5)

i dn there is defsomething fishy going on tho.

Wicked94Z

iTrader: (26)

oh **** if you would have run an Ai 22x intake lobe cam you'd be running 5.90s!!

robsquikz28

iTrader: (246)

very doubtful, there is something else goin on in there!!! I know people with that cam and arent anywhere near that time with out a set of heads or a lot of spray.

CamaroRacing12

iTrader: (5)

actually u know what. i take it back. its def possible. has to be at least a 200 hit tho at the very least. prolly is a 250 hit.

green94z

iTrader: (6)

that run was on a 200 shot. we've been 10.8 at 122 in the 1/4 on 150. would like see what in will run on 200 in the 1/4.