AChotrod

iTrader: (17)

I thought the OP said stroker motor? It can be done and if he has all the resources at school who knows whats possible.

AChotrod

iTrader: (17)

yep he did. I would run higher compression though. Use the reverse cooled heads to your advantage.

RamAir95TA

iTrader: (2)

Low 11s is easily attainable, and you don't need 500whp to get there. See sig.

96capricemgr

iTrader: (1)

AGAIN reread what YOU wrote. You were wrong, get over it.

FASTFATBOY

iTrader: (23)

He wants to do it at 3800 lbs, how much do you weigh?

Wicked94Z

iTrader: (26)

the thread title is "realistic" and you link to abare's car? lol you're a nutswinging fagot get over it

Jazz-LT1

iTrader: (2)

I doubt you could do it with stock heads even ported paper thin simply because the valve size becomes a restriction. You could go to a larger valve, but still its probably not going to happen. I'm finishing a stock bottom, stock ported head build and I'll be happy to see 375 at the crank and doubt I'll even see that. I don't have a radical cam, but I don't think a cam alone will net you 100hp difference unless its some kinda magic stick.

the_merv

iTrader: (88)

Z28reggie

Ok.. i will start build soon my teachers at school ae saying they can help get me there and as of now i am going to start savig every penny and hope to break about 4000 so lets pray. Basically 383 stroker with stock heads and a cc503(Most likely unless i find better) My goal is 425wrhp. I will be doing dnyo tuning and what not. Build is expected to start sometime after christmas (got to get extra cash) And target stop time is in june (I mean completely tuned and running) My teacher is a big camaro guy and he seems to know alot. I am pretty confident i will hit my goal with his help Wish me lucky guys i will keep forum posted. Thanks again for the comments.

Puck

iTrader: (17)

...and the useless example you posted could not be further from what the OP asked for. You might as well have brought up a turbo car.

BTW, could you please show me where all these 500 rwhp through stalled auto, stock headed, GM intake LTX cars that you speak of are hiding? Do they only show up at secret AI BBQs, because I sure haven't seen any?

96capricemgr

iTrader: (1)

They are about the only ones helping folks do it so you guys like to dismiss those results.

OutlawZ

iTrader: (4)

LOL.. .He said "secret AI Barbeques".....

that's funny no matter who ya are....

RamAir95TA

iTrader: (2)

Haven't been on the scales yet, but whatever a full weight T/A minus swaybar, back seats, and A/C weighs. So he has a few extra pounds, so what? That'd still be mid 11s. A few tweaks and he'd be in the low 11s.

My car is also untuned as well.

Z28reggie

Whats the stock weight about ? Add like 300 pounds from stereo then 230 for me and i want that to do 11s lol I guessed at 3800 from wht a guy said they weight i think i read they are around 3500

RamAir95TA

iTrader: (2)

300 pounds of stereo? What the hell type of system are you hauling?

gregrob

iTrader: (8)

"Secret A I barbeques" "300lb stereo systems"

LMMFAO

This thread is EPIC!!

Z28reggie

its my comp set up Which is pretty heavy about 300 pounds give or take 10 pounds But its pretty loud lol won my last comp of this season

Z28reggie

Heres a small vid of my stereo at about half volume because this is before i wired external voltage regulator so could sit in there and rev while filming lol Leave comments please =)

http://www.youtube.com/watch?v=sxd2PQgGWck

Whoops here it is

the_merv

iTrader: (88)

No vid bro..

You've never heard of the secret ninja super LT1 meets?

I was invited to one till they found out I was LSX..

Puck

iTrader: (17)

Lol looks like someone sharted at 0:42 .