lt1 383 stroker
11-17-2009, 11:57 AM
#1
Registered User
Thread Starter
Join Date: Aug 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
lt1 383 stroker how much does everyone think a decent priced shop will rebuild my lt1 and put put a stroker kit in for? also if i do the stroker kit and with the added power will i need to beef up my tranny if so what needs to be done?....Thanks
11-17-2009, 12:00 PM
#2
Depending on the quality of the parts and machine work, a good short-block will cost around $3000. On top of that, you need the valvetrain to match (heads, cam, springs, rockers) along with a PCM tune.
To do it RIGHT, you need around $6,000 minimum.
To do it RIGHT, you need around $6,000 minimum.
11-17-2009, 12:11 PM
#4
Lol the Auto 4L60E will **** out quick, i've killed 5 with bolt ons, cam and headwork. A 6 speed will hold a while with a good clutch but with beating on it you will take it out eventually.
