4 Barrel Throttle Body
4 Barrel Throttle Body How are you single plane guys doing an air intake with the 4 barrel throttle bodies? does the cowl HAVE to be cut? is there a way to get around it? am i better off getting a 90mm LS1 style TB? pics would also be a help (i did a search and didnt find the answers for what i was looking for
yeah i saw the elbows with the 90mm TB and the 105s but im looking for the 4 barrel throttle bodies and seeing how people are doing it without cutting the cowl (if possible) i would rather go with a 90 or 105 if the 4 barrel requires cutting the cowl
I was looking for 4 barrel pics and searched for OutlawZ.
https://ls1tech.com/forums/lt1-lt4-m...med-cowls.html
https://ls1tech.com/forums/9226425-post2.html
https://ls1tech.com/forums/lt1-lt4-m...med-cowls.html
https://ls1tech.com/forums/9226425-post2.html
Trending Topics
A Vic E is roughly 4.5 inches tall, between a 2 inch Accufab/Fast 4barrel and a 2inch low profile carb hat I think it will all stuff under the cowl (can't run any spacer). Theres about 9.5 inches to work with from the base of the intake to the cowl.
To the original poster, a Monoblade outflows a 90mm LS1 TB, could just run a 860 elbow or if you have fab skills make your own.
To the original poster, a Monoblade outflows a 90mm LS1 TB, could just run a 860 elbow or if you have fab skills make your own.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
Staging Lane
Joined: Dec 2009
Posts: 55
Likes: 0
From: Cordova, IL.
I think with a 4brl style throttle body you could run blow thru hat like the FI guys run and run a tube up to a ls1 air cleaner box. This wouldn't be much taller then an elbow and ls or 5.0 style throttle body.
I'll already have a grand into the intake, I think I'm just going to run an elbow to a ford/lsx throttle body
. I know some really good porting techniques on the supervic/Vic E/ vic jr so I'lljust do that myself.Have you bought the TB yet? Who did the port work and do you have any plenum pics?
I have been looking for pics, too. Im going to be putting my LT1 with LT4 heads and single plane into a 99 Camaro i just picked up for $300.
I was planning on running a Holley 1000CFM set up.
I was planning on running a Holley 1000CFM set up.
Staging Lane
Joined: Jun 2006
Posts: 69
Likes: 0
From: Diamond, IL
I am doing this swap right now also, and I have the 860 elbow so I could run the stock style tb. Can you run the 1000cfm 4 hole with a stock computer if you ran the hat like outlawZ with the maf inline along with the iat sensor! Just asking didn't really see what everyone was running for a pcm.
I run the 4 barrel from accufab. It's the 4150 style... Lokar cable hooks right up to it... it opens the first two barrels at part throttle and then the other two open up at like 60% throttle. all 4 are wide open at WOT.... standard GM sensors hook right up. vacuum ports at the back for your MAP sensor which has to be remotely mounted..... Tony and I talked about this setup when i was putting mine together and I know that he was haviing "Tip in" throttle issues with his XFI when he had the single 90mm throttle body IIRC. He went and bought a 4 barrel but didn't like it....
I never had ANY issues with mine. The hat is from procharger and one good thing about it is that you can point it any direction you want so it's adaptable to different setups. I'm going to keep the same setup when i go turbo....
You won't have to cut the cowl unless you do a hat and/or an air/filter.... if you're talking street car i highly recommend against NOT running an air filter... mine is a strip car with occasional street time and i STILL run a K&N filter....
I never had ANY issues with mine. The hat is from procharger and one good thing about it is that you can point it any direction you want so it's adaptable to different setups. I'm going to keep the same setup when i go turbo....
You won't have to cut the cowl unless you do a hat and/or an air/filter.... if you're talking street car i highly recommend against NOT running an air filter... mine is a strip car with occasional street time and i STILL run a K&N filter....