Fastest LT1's on LS1Tech.com
Seems these are all F-Bodies--- but can I get on the power adder list? Don't know how to "add to the list"...
Tom Foolery---1996 Impala SS 10.86@124 1.55 60' LT1 4L60 3.42 17"radials 4600lbs. 400 shot
LT1
17" Radials all around
Stock interior
Full exhaust w/ cutouts
Full on Hotchkiss Road race suspension---- absolutely zero weight transfer
Not much of a burnout for an evening in the low 40's
3.42 gear--- (still too much as it shifts into OD at 1000').
Clean engine compartment--- no nitrous lines showing- dry kit.Solenoids in fender and plumbed under intake 400hp.
May be faster than this old vid shows??????
This is a very close friends' car and we miss him every day
http://www.youtube.com/watch?v=cte6zGU1e1Y
Thanks.
Tom Foolery---1996 Impala SS 10.86@124 1.55 60' LT1 4L60 3.42 17"radials 4600lbs. 400 shot
LT1
17" Radials all around
Stock interior
Full exhaust w/ cutouts
Full on Hotchkiss Road race suspension---- absolutely zero weight transfer
Not much of a burnout for an evening in the low 40's
3.42 gear--- (still too much as it shifts into OD at 1000').
Clean engine compartment--- no nitrous lines showing- dry kit.Solenoids in fender and plumbed under intake 400hp.
May be faster than this old vid shows??????
This is a very close friends' car and we miss him every day
http://www.youtube.com/watch?v=cte6zGU1e1Y
Thanks.
Last edited by nickate; Apr 10, 2012 at 11:42 PM.
Thread Starter
TECH Senior Member
iTrader: (8)
Joined: Sep 2008
Posts: 5,130
Likes: 4
From: 6,000+ feet
I have no idea what you're asking? Please put it in the format requested on the first page, with shot size, etc..
Thanks,
Updated.
Sorry for the delay Josh. This thread keeps taking me off of email notification for some reason :shrug:
Thanks,
Updated.
Sorry for the delay Josh. This thread keeps taking me off of email notification for some reason :shrug:
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
10 Second Club
Joined: Oct 2007
Posts: 2,630
Likes: 28
chas010 said he took a few vids. He's talking about coming down to the shootout in Extreme Street N/A. You and him match up real well.
Thanks man! It ran 2 10.58's last year, but both were at 128mph's with 1.42 and 1.44? sixty foots. It's making some good power now, but I couldn't get it to hook. I tried 3 different air pressure settings but no luck. I have ZERO adjustability (outside of tire pressure) out back so I will have to do something about that. I'm thinking some AFCO coilovers ought to do the trick.
chas010 said he took a few vids. He's talking about coming down to the shootout in Extreme Street N/A. You and him match up real well.
chas010 said he took a few vids. He's talking about coming down to the shootout in Extreme Street N/A. You and him match up real well.
I don't see a lot of weight transfer on yours or your friends car from the vids I've seen. I run adjustable front and rears and the front end comes up quick run the rears stiff so the tires plant and go. I tried running the rears looser and the rear would squat come up and unload the tires about ten feet out.
10 Second Club
Joined: Oct 2007
Posts: 2,630
Likes: 28
I don't see a lot of weight transfer on yours or your friends car from the vids I've seen. I run adjustable front and rears and the front end comes up quick run the rears stiff so the tires plant and go. I tried running the rears looser and the rear would squat come up and unload the tires about ten feet out.
10 Second Club
Joined: Oct 2007
Posts: 2,630
Likes: 28
Thanks to chas010 for shooting a vid of the run!
https://www.youtube.com/watch?v=vPXT...e_gdata_player
https://www.youtube.com/watch?v=vPXT...e_gdata_player
10 Second Club
Joined: Oct 2007
Posts: 2,630
Likes: 28
I just ran a new best too. I still couldn't hook worth **** though. I have vids and slips. I ran 5 times, and 4 of them I was trapping 108.xx in the 1/8th but then it would lay down up top and go 130 to the 1/4.
Best run:
60-foot= 1.525
1/8th= 6.729 at 108.01
1/4= 10.501 at 130.37
Last year I was cutting 1.42's. I tried 4 different air pressures, 13, 12.5,12, 11.5 all spun. I need some suspension goodies out back
Best run:
60-foot= 1.525
1/8th= 6.729 at 108.01
1/4= 10.501 at 130.37
Last year I was cutting 1.42's. I tried 4 different air pressures, 13, 12.5,12, 11.5 all spun. I need some suspension goodies out back
I just ran a new best too. I still couldn't hook worth **** though. I have vids and slips. I ran 5 times, and 4 of them I was trapping 108.xx in the 1/8th but then it would lay down up top and go 130 to the 1/4.
Best run:
60-foot= 1.525
1/8th= 6.729 at 108.01
1/4= 10.501 at 130.37
Last year I was cutting 1.42's. I tried 4 different air pressures, 13, 12.5,12, 11.5 all spun. I need some suspension goodies out back
Best run:
60-foot= 1.525
1/8th= 6.729 at 108.01
1/4= 10.501 at 130.37
Last year I was cutting 1.42's. I tried 4 different air pressures, 13, 12.5,12, 11.5 all spun. I need some suspension goodies out back
108 in the 1/8th is getting down Joel should be good for 132-133 mph in the 1/4.
Congrats.
10 Second Club
Joined: Oct 2007
Posts: 2,630
Likes: 28
http://www.youtube.com/watch?v=CV-Gi...ature=youtu.be
I need the guy on the rights suspension, lol. He goes only .07 slower but 5 mph slower.
I need the guy on the rights suspension, lol. He goes only .07 slower but 5 mph slower.