trifecta program

Here is a simple tutorial written by Solomon on how to upload the tune :-
For WinFlash, go to Tools->Program PCM and then choose your new .bin file.
Be absolutely certain nothing interrupts this process once it has started or you will damage the flash chip in the PCM, and a new one will need socketed or soldered in before you can use the PCM again (the car will also not run).
Once the programming process is complete, turn off the ignition for a few seconds, and then you should be able to start the car like normal.
Trending Topics
The Best V8 Stories One Small Block at Time
I think you might just have to wait a couple of days until you can get in contact with Vince.


