Quick Performance Ebay 9 inch
Thread Starter
TECH Senior Member
iTrader: (8)
Joined: Sep 2008
Posts: 5,130
Likes: 4
From: 6,000+ feet
Quick Performance Ebay 9 inch Anyone running one of these?
You can get the housing with all brackets and either Moser or their axles for a G.
Not bad considering you could go to the junkyard and find a 3rd member for a couple hundo and there you go.
9inch for under 1500
You can get the housing with all brackets and either Moser or their axles for a G.
Not bad considering you could go to the junkyard and find a 3rd member for a couple hundo and there you go.
9inch for under 1500
I would say... if you're spending the money on an aftermarket rear, you're obviously looking for bulletproof strength and peace of mind. Does that involve junkyard third members and crappy axles? No. If I was building a 9" i'd go straight for a detroit locker or spool, 35 spline axles, and a nodular case. Its always cheaper in the long run to build it right the first time around. I'm speaking from experience, because i started out with a stock case 9", truecrap, and 31 spline axles... and here i am another 1500 later with the nodular center, 35 spline axles and a spool that i should have gotten the first time around.
I would say... if you're spending the money on an aftermarket rear, you're obviously looking for bulletproof strength and peace of mind. Does that involve junkyard third members and crappy axles? No. If I was building a 9" i'd go straight for a detroit locker or spool, 35 spline axles, and a nodular case. Its always cheaper in the long run to build it right the first time around. I'm speaking from experience, because i started out with a stock case 9", truecrap, and 31 spline axles... and here i am another 1500 later with the nodular center, 35 spline axles and a spool that i should have gotten the first time around.
You get what you pay for. If your gonna buy a rear save up and buy once.
Thread Starter
TECH Senior Member
iTrader: (8)
Joined: Sep 2008
Posts: 5,130
Likes: 4
From: 6,000+ feet
Since when in the hell are Moser's crappy axles?
And sorry I don't have 3k to drop on a rear.
Guess ill go the original 8.8 afro rigged route I was going to. Will be even cheaper than this eBay / junkyard 9 inch pile I dreamed up.
Carry on
And sorry I don't have 3k to drop on a rear.
Guess ill go the original 8.8 afro rigged route I was going to. Will be even cheaper than this eBay / junkyard 9 inch pile I dreamed up.
Carry on
You should look into a Strange S60. They come standard with 35 spline axles, and if you went with a spool, you could pick one up for a little over 2k, brand new. These things have a 9 3/4 ring gear, you won't hurt it. If you want a posi, price goes up to around $2300, but it's still cheaper and stronger than a comparable 9".
I've got one, and I love it.
$.02
I've got one, and I love it.
$.02
Trending Topics
I got my setup from him w/ 35 spline Moser axles for less than that and QT has a FAR superior tq arm bracket to anyone else on the market. Not to mention he was easy to get a hold of/talk to/help with questions.
I put together my QT setup with 35 splines and a spool for under $2100...brand new.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
you should look into a strange s60. They come standard with 35 spline axles, and if you went with a spool, you could pick one up for a little over 2k, brand new. These things have a 9 3/4 ring gear, you won't hurt it. If you want a posi, price goes up to around $2300, but it's still cheaper and stronger than a comparable 9".
I've got one, and i love it.
$.02
I've got one, and i love it.
$.02
You should look into a Strange S60. They come standard with 35 spline axles, and if you went with a spool, you could pick one up for a little over 2k, brand new. These things have a 9 3/4 ring gear, you won't hurt it. If you want a posi, price goes up to around $2300, but it's still cheaper and stronger than a comparable 9".
I've got one, and I love it.
$.02
I've got one, and I love it.
$.02
Love mine and got it shipped to my door for 2350 with driveshaft. Got one smoking deal on it. And it bolted right in with no modifications. The thing I don't like about 9in rears is that they do not bolt in.
