It's alive!!!!
It's alive!!!! IT LIVES!!!!
383 build came to life about 20 min ago. Yhee frickin ha baby.
Gota thank a lot of you for all of the help and knowledge you have shared over the past year as it has gone from the drawing board to real life. Special thanks to Shbox for the cool links, pics, diagrams, and write ups he has taken time to document.
I have more work to go yet, it sounds like I messed up and did not get one or two rockers right on the passenger side so I need to adjust those. I also have a small weeper on the heater lines I reused so I will be replacing those. It also seems the down time was no good for my fuel pressure regulator as it has a very small weeping leak now. Other than that I will be calling the tuner tomorrow with all of the specs on this thing to get the tune in the mail to me.
Again thanks all of you that have responded to my post no matter how stupid they may have seemed your responses help me understand the things I need to understand and helped me get this build done. I will make a vid as soon as I wrap up these little problems and once I get the tune installed.
Thanks again!!!
383 build came to life about 20 min ago. Yhee frickin ha baby.
Gota thank a lot of you for all of the help and knowledge you have shared over the past year as it has gone from the drawing board to real life. Special thanks to Shbox for the cool links, pics, diagrams, and write ups he has taken time to document.
I have more work to go yet, it sounds like I messed up and did not get one or two rockers right on the passenger side so I need to adjust those. I also have a small weeper on the heater lines I reused so I will be replacing those. It also seems the down time was no good for my fuel pressure regulator as it has a very small weeping leak now. Other than that I will be calling the tuner tomorrow with all of the specs on this thing to get the tune in the mail to me.
Again thanks all of you that have responded to my post no matter how stupid they may have seemed your responses help me understand the things I need to understand and helped me get this build done. I will make a vid as soon as I wrap up these little problems and once I get the tune installed.
Thanks again!!!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Sounds good!!! I went with a mild cam for torque but it has a little lob to it. just waiting on the tune and a new atl and then I have to dig that camcorder out and make the vid.
lol ok here I love this one. everyone thinks I'm nuts for letting my wife help. And yes it went in through the top with the car sitting on the ground, no problem clearing the hood or the bumper and no scratches.
More to come as soon as I have time
More to come as soon as I have time
