Oil pressure dropping under high RPM / load ?
#23
11 Second Club
iTrader: (1)
windage is the wind from the pistons and crank blowing the oil around in the pan foaming the oil or uncovering the pickup.
The oiling problems with the Canton pan are pretty much universal to all that use it.
Proper windage tray will almost always fix it.
Just another example about how NAME means MORE than a result
The oiling problems with the Canton pan are pretty much universal to all that use it.
Proper windage tray will almost always fix it.
Just another example about how NAME means MORE than a result
#24
TECH Veteran
iTrader: (12)
Thanks.
I figured that was correct but that circle following "operating range" is what was making me think, huh.
I saw over on cz28 that two guys with a big milodon pan and stock pan fixed their pressure drop by reducing oil levels. It seems reasonable that windage was their problem.
I am going to reduce from full to this level and see what happens:
ADD●xx●xx●xx●◄──OPERATING RANGE●
______/\
I figured that was correct but that circle following "operating range" is what was making me think, huh.
I saw over on cz28 that two guys with a big milodon pan and stock pan fixed their pressure drop by reducing oil levels. It seems reasonable that windage was their problem.
I am going to reduce from full to this level and see what happens:
ADD●xx●xx●xx●◄──OPERATING RANGE●
______/\