Building a 383 stroker
#41
Village Troll ![](http://jameskellock.tripod.com/sitebuildercontent/sitebuilderpictures/rsman.jpg)
![](http://jameskellock.tripod.com/sitebuildercontent/sitebuilderpictures/rsman.jpg)
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
People are scared of it because there have been alleged quality control issues with it like the Eagle cranks. Just have a competent machinist work on it. Make doubly sure to get the crank snout, crank flange (for flywheel/flex plate) and pilot hole diameters measured to insure they are at stock spec.
#42
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
That 600 bucks turns into nearly a grand pretty fast
![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
#43
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Also, thats 550 up here in canada, and although our dollar is nearly on par, you gotta pay 6? % brinding it across the boarder, the taxes on buying it, and taxes in the province we live in for buying it. Not to mention shipping!
That 600 bucks turns into nearly a grand pretty fast![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
That 600 bucks turns into nearly a grand pretty fast
![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
#44
TECH Regular
Thread Starter
Join Date: Jun 2009
Location: Victoria - Vancouver Island, BC, Canada
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Crank was just delievered to my work
The mechanics in the shop (Im a service writer) keep asking what I'm building! haha. When I ordered the crank, the guy at the parts store asked if I wanted to order the balancer with it. Anything I should know about that?
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#45
TECH Regular
Thread Starter
Join Date: Jun 2009
Location: Victoria - Vancouver Island, BC, Canada
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
PS - Thanks to everyone who gave me suggestions and is helping "guide me along". My builder is great and has been teaching me a lot as we go as well. Definately a good learning experience
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#47
TECH Regular
Thread Starter
Join Date: Jun 2009
Location: Victoria - Vancouver Island, BC, Canada
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yup, extremely shitty job! I'm basically just a scapegoat. Oh well, only 5 more months and I'm off to autobody school and will never have to sit behind a desk again! ![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
Can I not re-use my stock flexplate?
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
Can I not re-use my stock flexplate?
#56
TECH Fanatic
iTrader: (6)
Join Date: Oct 2007
Location: Central Valley, CA
Posts: 1,118
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
you don't need a new balancer unless you are spinning that thing to the moon or would like to have the balancer keyed due to a supercharger or something like that, the stock damper is just that a damper so it is "neutral balanced". If you are having it internally balanced than it is not absolutely necessary to balance the crank and flexplate at the same time but it is always a good idea to check balancing before assembly.
#58
Village Troll ![](http://jameskellock.tripod.com/sitebuildercontent/sitebuilderpictures/rsman.jpg)
![](http://jameskellock.tripod.com/sitebuildercontent/sitebuilderpictures/rsman.jpg)
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Get the rotating assembly internally balanced. Reason being if you ever need to replace the flywheel/flexplate it's as easy as getting the new piece zero balanced and you'll be on your way. If it's externally balanced you will have to get the new piece balanced with the rotating assy which requires you to take it out of the block.
#59
TECH Fanatic
iTrader: (6)
Join Date: Oct 2007
Location: Central Valley, CA
Posts: 1,118
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
^^ not necessarily, if you balance it to stock specs you just replace with oem replacements. Granted their tolerances are not nearly as tight as most of us would like but it would work. However, internal balancing is the way to go