help!!!
Thread Starter
On The Tree
Joined: Feb 2009
Posts: 120
Likes: 0
From: Arnold, Missouri. Millstadht, Illinois
help!!! i have replaced the accessory bracket on the front of my lt-1 two times now. what breaks in the bold holding the power steering pump to the bracket. is there anything i can do to make it stronger and not have bolts break???
I'm going to guess that the bolts that are breaking are the thinner narrow 10mm bolts that hold the power steering pump to the bracket. There's no reason they should be breaking. Are you reusing the stock bolts? Are the bolts you are using long enough?
Trending Topics
grade 8 is the hardness of the bolt, its the hardest grade. hardware stores sell them. If its backing it self off theres a problem, the bolts should not do this. ive never had one break on any acc bracket so u have a bigger issue
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
