1SWT95Z

I was just wondering if anyone has this in their LT, what kind of power it makes with usual bolt-ons and ported stock heads, what RPM range it runs well in, and how it runs/acts on the street. Specs are 231/239@.050 .570/.586 lift with 1.6s, 110lsa.

JB_97ws6TA

iTrader: (6)

I run the 60121 with good results, I wouldn't hesitate to step up to the 60122 either if emissions allowed. FWIW the 60121 made 339/343 on stock heads with supporting mods through a stalled auto. I run this cam in my 383 now and have since swapped to m6 and it made 405/415 with a ballpark tune with trickflow heads and I am sure there is some more to be had in the tune. That being said I think the voodoo line are some of the best off the shelf cams to be had with a good balance between ramp rates and valvetrain stability/longevity

SS MPSTR

iTrader: (1)

...both Harold Brookshire grinds, and both proven performers.

gregrob

iTrader: (8)

Pretty big for stock cubes and compression. Could work well in a hot 355 depending on what you're doing with it.

1SWT95Z

I've got a 355ci with 180cc ported stockers, midlength pacesetters, 52mm Edelbrock, 30# Seimens injectors, auto trans with stock stall and the comp XFI-466(i think that's the number) 218/224 .570 lift on a 113lsa it made 336rwhp and 325lbs/tq. I want to do a new cam sometime soon, but I also plan to do a 383 and possibly an M6 in the future. I thought this cam might be ok for a 355 but was thinking it might be a lot better in a 383.

TravisMcGill2000

iTrader: (2)

You would have to have a stall to run that cam. So you mite wana do your tranny swap 1st.. If it was me i stick with the a4 and pick up a good stall.