possible th350 swap?????
#105
Thread Starter
11 Second Club
iTrader: (17)
Joined: Jul 2008
Posts: 9,896
Likes: 1
From: Chicago area
Cool. Any company better than the other or should I just order this.
http://www.jegs.com/i/TCI/890/399174/10002/-1
http://www.jegs.com/i/TCI/890/399174/10002/-1
#112
Thread Starter
11 Second Club
iTrader: (17)
Joined: Jul 2008
Posts: 9,896
Likes: 1
From: Chicago area
Alright guys Im bringing this back up. T56 is out of the car and the Th350 is about ready to bolt in. I was about to got tot the track last night after fixing my busted yoke and noticed that trans fluid was leaking out the rear. Pulled the seal and found the bushing was also damaged. So I said **** it if I have to take of the tail housing I might as well do the trans swap. lol.
Ive had everything sitting around for a while now so figured why not.
Oh Stock flex plate and bell housing bolts will work just fine and I ended up with a 4500+ BTE converter after seeing some cars work really really good with them.
Ive had everything sitting around for a while now so figured why not.
Oh Stock flex plate and bell housing bolts will work just fine and I ended up with a 4500+ BTE converter after seeing some cars work really really good with them.
#114
Thread Starter
11 Second Club
iTrader: (17)
Joined: Jul 2008
Posts: 9,896
Likes: 1
From: Chicago area
Will do. I was going to finish it yesterday but ended up at the track for King of the Streets. Nothing like watching 7 sec cars get down with NO prep in 40 degree weather. Crazy part is the cars hooked like crazy.