Hey im building a 383 and the crank is keyed. any ideas on where to buy a keyed balance hub or can a shop cut mine?

 

The stock crank is keyed too, just the hub is not.

Honestly I would look at a new damper with keyed hub, but you can have a shop key your's.

 

i have a underdrive machined to fit my supercharger pully. I will just ask a shop i guess. Thanks for the tip

 

You could get a new underdrive damper and have less crap stacked up on the crank too.

 

I picked one up from Jegs for the last build I worked on. Sorry, don't have the part number or price.

 

Golen Engines is one; IIRC someone bought one from JEGS.

Jake

 

I have one from Jegs. Real nice piece.

 

Got one from jegs too..quality piece!

 

I keyed my own with a file! lol Stupid undersized Eagle crank snout

Has lasted for 25,000+ miles.

 

i will check out jegs. thanks guys

 

mine is from jegs too, i was looking at my account online to see if i could link you a part #, but their online system sucks. I basically have to have the paper invoice in front of me to look a previous order, pretty lame system.

i found it by searching...

93-95 -> http://www.jegs.com/i/JEGS/555/51607/10002/-1

96-97 -> http://www.jegs.com/i/JEGS/555/51609/10002/-1

 

so these hubs you posted here have a little slot for a keyed crank? Thanks

 

I put 2 keys in mine (ATI hub came with 2 slots) had 2nd slot milled in crank.

 

my crank has 2 keys also. where did you get that ATI hub?

 

I broached a key slot in mine at work. Took all of 15minutes to do