doin a little exhaust research
#22
Staging Lane
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Stainless will still discolor and look like crap after a short time. Besides that, uncoated headers make the engine bay very hot. Last rebuild, I sent my Kooks off and had them coated. Much happier now. For sound, I get a lot of compliments on my Borla exhaust.
#23
TECH Enthusiast
iTrader: (6)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hey:
Stainless Steel all the way, Ebay or LPPs if you can wait is my advice to you. Also check with the guys that are happy with the ebay headers and what vendor they got them from as not all ebay headers are the same, in terms of fitments, quality, and price per value. Get a few recs from the same vendor from folks that actually run them before you spend your money.
As far as stainless looking bad you can always get them re polished and after I got my LPPs redone they lasted over a year before they started to turn gold at all. they still look better than any rusty pipes, and if you want you can always send them out for a jet hot type coating, but stainless run cooler than steel do without the coating on either, so good luck with your choice.
Dub
Stainless Steel all the way, Ebay or LPPs if you can wait is my advice to you. Also check with the guys that are happy with the ebay headers and what vendor they got them from as not all ebay headers are the same, in terms of fitments, quality, and price per value. Get a few recs from the same vendor from folks that actually run them before you spend your money.
As far as stainless looking bad you can always get them re polished and after I got my LPPs redone they lasted over a year before they started to turn gold at all. they still look better than any rusty pipes, and if you want you can always send them out for a jet hot type coating, but stainless run cooler than steel do without the coating on either, so good luck with your choice.
Dub
Last edited by 1993 z28 f1; 03-23-2011 at 06:24 PM.
#25
TECH Regular
iTrader: (6)
Join Date: Nov 2010
Location: Fort Mill, SC
Posts: 411
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Also true duals aren't a bad idea, just have the turndowns or tip outside of the car, or at least pointing at an angle or it will resonate your ears off.