LTX Cylinder Heads
#63
11 Second Club
iTrader: (6)
The point of that post was to show that it doesn't take some crazy high dollar head setup to make that kind of power like a bunch of people in this thread are saying when there are already proven results that a $2000 heads/cam setup cam reach his goals.
#64
10 Second Club
iTrader: (26)
FI's 9 Second LT1 Street Car! - Forced Inductions has pounded the rollers with 1012rwhp & 909rwtq SAE with their PTK 88mm Turbo setup on an ordinary budget Eagle 355 rebuild. This street terror runs our 200cc ported GM lt1 castings, a 218/218 .544/.544 camshaft, 12-bolt rear end, and a D&D T56 6-speed. This is a full weight street car with 3680lb Raceweight!. With Jose @ FI's expertise it's run a best of 122mph in the 1/8th and 9.871 @ 156.74mph in the quarter! The fastest LT1 powered LT1 F-body ever! Click HERE for a timeslip of this record setting pass!
#66
11 Second Club
iTrader: (6)
oh here it is! oh wait, that turd never laid down 1000 hp
http://www.forcedinductions.com/TurboSS.htm
http://www.forcedinductions.com/TurboSS.htm
Maybe this will help?
http://www.camaroz28.com/forums/showthread.php?t=354038
#67
#71
11 Second Club
iTrader: (6)
So how were they mislead? I'm trying to figure out how them and customers sharing results of their product is missleading people? They never claimed that throwing a set of their 215tfs heads and a solid roller on a car will make it magically run 9.50's like abare runs.
Hell if anyone mislead people it was that throttle body porter bert claiming to be an expert.
Hell if anyone mislead people it was that throttle body porter bert claiming to be an expert.
#74
So how were they mislead? I'm trying to figure out how them and customers sharing results of their product is missleading people? They never claimed that throwing a set of their 215tfs heads and a solid roller on a car will make it magically run 9.50's like abare runs.
Hell if anyone mislead people it was that throttle body porter bert claiming to be an expert.
Hell if anyone mislead people it was that throttle body porter bert claiming to be an expert.
A fully forged splayed 4-bolt shortblock, controlled by a DFI system, running race gas, and pushing 24psi of boost is a budget built street car now? . I can promise you that car has more in its fuel system and computer then most people on this site have in total mods.
I don't see it in good taste to advertise a product using results that only a very small percentage of people have the cash or knowledge to duplicate. Yes, they are good heads for what they are, and I have recommended them multiple times...but don't expect to throw just the 200cc kit on a car and expect it to run 10s, because most run far from that.
#76
On The Tree
Thread Starter
Join Date: Oct 2010
Location: Dayton ,Ohio
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Gotta love pissing matches. So I have a question, since he is running a Eagle crank and rod's and making that power. Would there be any problem in running my Compstar crank and rod's with some upgraded pistons. What is the HP/TQ rating for the Compstar stuff.
I am having problems getting ahold of AI, seems like every time they call back I am unavailable to talk. I guess I will try again tomorrow.
I am having problems getting ahold of AI, seems like every time they call back I am unavailable to talk. I guess I will try again tomorrow.
#77
11 Second Club
iTrader: (6)
Gotta love pissing matches. So I have a question, since he is running a Eagle crank and rod's and making that power. Would there be any problem in running my Compstar crank and rod's with some upgraded pistons. What is the HP/TQ rating for the Compstar stuff.
I am having problems getting ahold of AI, seems like every time they call back I am unavailable to talk. I guess I will try again tomorrow.
I am having problems getting ahold of AI, seems like every time they call back I am unavailable to talk. I guess I will try again tomorrow.
#78
11 Second Club
iTrader: (6)
Then again you have a high compression stroker with a huge cam and worked afr 210's that trapped a whopping 96mph so you clearly have first hand knowledge on what works...
#79
What they actually say is
Originally Posted by AI
on an ordinary budget Eagle 355 rebuild
#80
Still waiting on a link to where anyone from Ai claimed that it is just a run of the mill setup.
Then again you have a high compression stroker with a huge cam and worked afr 210's that trapped a whopping 96mph so you clearly have first hand knowledge on what works...
Then again you have a high compression stroker with a huge cam and worked afr 210's that trapped a whopping 96mph so you clearly have first hand knowledge on what works...