How much Power added by Compression and Cam
#1
How much Power added by Compression and Cam
Well bought a motor last night for the bird.
List of mods to it are
4 Bolt LT1
Holley 58MM TB
42 pound injectors
Flat top forged pistons
Complete Comp Valve train
EWP
MSD Opti
MSD Coil
CC306 cam
6.9 on 150 shot trapped 100 and 7.5 on motor didn't ask for MPH for it
He says it compression is bumped to maybe 11:1 I was wondering what I could bump it up to with gaskets only and how much power do you gain from a point of compression
That and going with a custom cam instead of the CC306???
Figured there is time to be made up in lil places like this and just makes me feel better if i go through it
Looking forward to hearing what yall say!!
List of mods to it are
4 Bolt LT1
Holley 58MM TB
42 pound injectors
Flat top forged pistons
Complete Comp Valve train
EWP
MSD Opti
MSD Coil
CC306 cam
6.9 on 150 shot trapped 100 and 7.5 on motor didn't ask for MPH for it
He says it compression is bumped to maybe 11:1 I was wondering what I could bump it up to with gaskets only and how much power do you gain from a point of compression
That and going with a custom cam instead of the CC306???
Figured there is time to be made up in lil places like this and just makes me feel better if i go through it
Looking forward to hearing what yall say!!
#2
TECH Fanatic
iTrader: (2)
Join Date: Dec 2010
Location: Oklahoma
Posts: 1,084
Likes: 0
Received 0 Likes
on
0 Posts
How is the compression raised? only two valve reliefs, or thinner gaskets? increasing the CR by a full point can give you 15-25 hp, it just depends on a few things.
a custom grind can get you another 15-25 depending on how radical you go with the custom.
a custom grind can get you another 15-25 depending on how radical you go with the custom.
#3
He has it raised by the pistons I want want to raise it as much as possible with out changing the pistons.
Just want to change a few things that can make the motor better then it already is drove in the car it was in yesterday Oil pressure said at 60 before and after the drive idling
Just want to change a few things that can make the motor better then it already is drove in the car it was in yesterday Oil pressure said at 60 before and after the drive idling
#5
whatever compression is doesn't really matter to me. He said it was raised a lil not much will find out 100% next weekend once I get it all torn down and get a part number off the pistons.
I Just want to know how much it can be lifted from just gaskets I've heard shim gaskets and stuff bump them up almost a solid point not 100% on that though
I Just want to know how much it can be lifted from just gaskets I've heard shim gaskets and stuff bump them up almost a solid point not 100% on that though
Trending Topics
#9
TECH Addict
iTrader: (1)
well I know the guy that built that car if that is the case...the previous owner
IIRC it's just a LT1 that the owner prior to my friend rebuilt (never heard him say forged pistons though, could be) with a set of heads he ported himself and cc306 like you mentioned. the car ran those times with only a mild street tune. full dyno tune would definately bring up the performance.
it's a great running motor though, how much does he want btw?
IIRC it's just a LT1 that the owner prior to my friend rebuilt (never heard him say forged pistons though, could be) with a set of heads he ported himself and cc306 like you mentioned. the car ran those times with only a mild street tune. full dyno tune would definately bring up the performance.
it's a great running motor though, how much does he want btw?