intake elbow
Thread Starter
Launching!
Joined: Oct 2010
Posts: 240
Likes: 0
intake elbow So I got my intake elbow in from siliconeintakes.com and the 4"-3.5" 90 degree bending reducer is about an inch and a half shorter than factory 1 Le elbow. Any suggestions tips or anything would be appreciated
Double t-bolt coupler joiner and another straight short coupler
Joes f'ing hilarious
so, do to the basement research development,materials & 2mexican assemblers dept .the above patented elbow can be bought via paypal for ONLY $500 !!!! WOW! What a deal.... Kiss not included but can be bought seperatly .PM for price increase and delivery.
**only available from "getting it hard from behind custumz"** limited supply , 30HP gains! Results may vary
Order Now!
Joes f'ing hilarious
so, do to the basement research development,materials & 2mexican assemblers dept .the above patented elbow can be bought via paypal for ONLY $500 !!!! WOW! What a deal.... Kiss not included but can be bought seperatly .PM for price increase and delivery.**only available from "getting it hard from behind custumz"** limited supply , 30HP gains! Results may vary
Order Now!
Last edited by defaultexistence; Apr 7, 2011 at 02:01 PM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
whats the problem with it being a little shorter? the intake hitting something? If so use a 1 inlonger coupler on the oposite side of the MAF and this should make up for the 1 inch
Thread Starter
Launching!
Joined: Oct 2010
Posts: 240
Likes: 0
Ok thank you I ordered a red elbow and had to go back and order a straight reducer well I was in a hurry and got the black one on accident so I'm nervous uy won't look right because I probably won't be able to match the red if I painted it
