intake elbow
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
So I got my intake elbow in from siliconeintakes.com and the 4"-3.5" 90 degree bending reducer is about an inch and a half shorter than factory 1 Le elbow. Any suggestions tips or anything would be appreciated
#3
TECH Fanatic
iTrader: (11)
Join Date: Sep 2005
Location: fort walton beach,fl
Posts: 1,954
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Double t-bolt coupler joiner and another straight short coupler
Joes f'ing hilarious
so, do to the basement research development,materials & 2mexican assemblers dept .the above patented elbow can be bought via paypal for ONLY $500 !!!! WOW! What a deal.... Kiss not included but can be bought seperatly .PM for price increase and delivery.
**only available from "getting it hard from behind custumz"** limited supply , 30HP gains! Results may vary
Order Now!
Joes f'ing hilarious
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
**only available from "getting it hard from behind custumz"** limited supply , 30HP gains! Results may vary
Order Now!
Last edited by defaultexistence; 04-07-2011 at 02:01 PM.
Trending Topics
#10
TECH Fanatic
iTrader: (8)
Join Date: Jan 2011
Location: Pinellas Park Florida
Posts: 1,550
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
whats the problem with it being a little shorter? the intake hitting something? If so use a 1 inlonger coupler on the oposite side of the MAF and this should make up for the 1 inch
#18
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ok thank you I ordered a red elbow and had to go back and order a straight reducer well I was in a hurry and got the black one on accident so I'm nervous uy won't look right because I probably won't be able to match the red if I painted it