What I've been up to this winter
#1
11 Second Club
Thread Starter
iTrader: (11)
Join Date: Jul 2007
Location: Kentucky
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
What I've been up to this winter
After a friend with a terminator went with a KB to beat me I decided I wasn't going to go down without a fight!
Here are a few pics of parts and build progress and such....
Here are a few pics of parts and build progress and such....
#4
11 Second Club
Thread Starter
iTrader: (11)
Join Date: Jul 2007
Location: Kentucky
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
hmm some details...
Details
200cc cnc ported heads with 2.0 and 1.56 valves
Crane NSA 1.6 7/16 rrs
Trick flow chrome moly push rods
LS7 Lifters
CC306
Efi Connections 24x
gm performance single roller timing set
Arp head bolts
Arp main studs
2 bolt main
Reconditioned pm rods with Arp hardware (came in the short block)
factory crank, speed pro forged piston and chrome moly rings
Ported intake
52mm TB
ewp
30lb injectors (may change after logging dc)
3600 stall
373 gears
Built 4l60e
built 7.5 rear
ls1 lid conversion
Pacesetter headers and ory with dual cut outs
magnaflow cat back
and daves plate kit.
on the cc503 cam only setup i ran 11.43 on the gun. I should hit the 10s this time around. Im hoping for close to 400rwhp na and depending on the size of the shot I go with between 500 and 600 rwhp
200cc cnc ported heads with 2.0 and 1.56 valves
Crane NSA 1.6 7/16 rrs
Trick flow chrome moly push rods
LS7 Lifters
CC306
Efi Connections 24x
gm performance single roller timing set
Arp head bolts
Arp main studs
2 bolt main
Reconditioned pm rods with Arp hardware (came in the short block)
factory crank, speed pro forged piston and chrome moly rings
Ported intake
52mm TB
ewp
30lb injectors (may change after logging dc)
3600 stall
373 gears
Built 4l60e
built 7.5 rear
ls1 lid conversion
Pacesetter headers and ory with dual cut outs
magnaflow cat back
and daves plate kit.
on the cc503 cam only setup i ran 11.43 on the gun. I should hit the 10s this time around. Im hoping for close to 400rwhp na and depending on the size of the shot I go with between 500 and 600 rwhp
Trending Topics
#10
11 Second Club
Thread Starter
iTrader: (11)
Join Date: Jul 2007
Location: Kentucky
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
thanks
Thanks everyone! I appreciate all the kind words. MAN its been a LOT of work. But the time is drawing near to reap the rewards.
Got my valve covers in today, so now I can finish fabbing the coil brackets and get all of that mocked up.
Got my valve covers in today, so now I can finish fabbing the coil brackets and get all of that mocked up.
#12
11 Second Club
Thread Starter
iTrader: (11)
Join Date: Jul 2007
Location: Kentucky
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
mine is just a little old 355 with stock rods with arp bolts and stock crank. We will see how the rods hold up to a 150 -200 shot. Hp isnt what kills a rod anyways, its RPM and Detonation. Im gonna make sure there is 0 detonation and im gonna keep the rpms down to about 6700 or so. so they should def. hold the 150 shot.
#13
mine is just a little old 355 with stock rods with arp bolts and stock crank. We will see how the rods hold up to a 150 -200 shot. Hp isnt what kills a rod anyways, its RPM and Detonation. Im gonna make sure there is 0 detonation and im gonna keep the rpms down to about 6700 or so. so they should def. hold the 150 shot.
Still sounds like a fun ride
#15
Are those the ebay cheap valve covers? How do they clear your rocker arms, did you have to do any mod to them to get them to fit? I ordered a set a couple of days ago should be here by Friday, then I will start my new 355.
Looks good.
Looks good.