Startin a new Build.. '95 Trans am Got Some Questions.
#21
Got the Cam Out today. its a Comp Extreme Energy xr269hr-12 The Specs are .495/.503 lift and 218/224 Duration. Not to bad of a cam I think im just going to leave it in the car, it Should Get me into the 12's..
#22
those valve springs deffinetly arnt stock lol. They are way to clean and hell you can see they are dual springs as well.
rocker arms have me wondering who does a cam and springs and doesnt do roller rockers.
How many miles on the car? Everything under that valve cover is amazingly clean...
rocker arms have me wondering who does a cam and springs and doesnt do roller rockers.
How many miles on the car? Everything under that valve cover is amazingly clean...
#23
I dont know about the Milage... The Bearings Definitely Had some wear on them. But nothin that i have taken apart has been hurt yet. I checked all the Main Bearings (Clevite P's on the Mains and Clevite C's on the Rods) and they looked good. Im Pulling the Pistons tomorrow and hopefully they Check out the Same also..
combustion chamber in the head.
Piston
Spot right by the Water Passage is bent casued it to leak.
combustion chamber in the head.
Piston
Spot right by the Water Passage is bent casued it to leak.
Last edited by LeonbergerG; 05-05-2011 at 05:31 PM.
#24
Got Some Parts Cleaned up, Motor is at the Machine Shop. Slowly But surely it will be ready for this Summer.
Fresh Intake
Mach up for the New Intake and Valve Covers (Not on an LT1 Block)
Alternator Relocation, Custom Bracket have about 20 bucks total on it.
Also Z06 Wheels Just need two more Tires.
Fresh Intake
Mach up for the New Intake and Valve Covers (Not on an LT1 Block)
Alternator Relocation, Custom Bracket have about 20 bucks total on it.
Also Z06 Wheels Just need two more Tires.