.900" Base Circle Cams?????
Thread Starter
10 Second Club
Joined: Oct 2007
Posts: 2,630
Likes: 28
.900" Base Circle Cams????? Anyone know where to order one from?
I need a few specific things......
Obviously a .900" base circle
I'm still running a non-vented opti so it must have the hole in the middle to clear the dowel pin.
4/7 swap.
Comp said no. I picked out a grind FROM THEIR CATALOG exactly what I wanted with .900", 4/7, and lift and duration I liked, and they still said they couldn't do it with the LT1.
I sent a detailed email to Bullet and haven't heard a word.
Any other suggestions?
I have a decent cam sitting here that I can use but it is a little on the small side for what I want to do.
I need a few specific things......
Obviously a .900" base circle
I'm still running a non-vented opti so it must have the hole in the middle to clear the dowel pin.
4/7 swap.
Comp said no. I picked out a grind FROM THEIR CATALOG exactly what I wanted with .900", 4/7, and lift and duration I liked, and they still said they couldn't do it with the LT1.
I sent a detailed email to Bullet and haven't heard a word.
Any other suggestions?
I have a decent cam sitting here that I can use but it is a little on the small side for what I want to do.
Anyone know where to order one from?
I need a few specific things......
Obviously a .900" base circle
I'm still running a non-vented opti so it must have the hole in the middle to clear the dowel pin.
4/7 swap.
Comp said no. I picked out a grind FROM THEIR CATALOG exactly what I wanted with .900", 4/7, and lift and duration I liked, and they still said they couldn't do it with the LT1.
I sent a detailed email to Bullet and haven't heard a word.
Any other suggestions?
I have a decent cam sitting here that I can use but it is a little on the small side for what I want to do.
I need a few specific things......
Obviously a .900" base circle
I'm still running a non-vented opti so it must have the hole in the middle to clear the dowel pin.
4/7 swap.
Comp said no. I picked out a grind FROM THEIR CATALOG exactly what I wanted with .900", 4/7, and lift and duration I liked, and they still said they couldn't do it with the LT1.
I sent a detailed email to Bullet and haven't heard a word.
Any other suggestions?
I have a decent cam sitting here that I can use but it is a little on the small side for what I want to do.
COMP couldn't grind my cam particular cam on a 107LSA, so we had to do a 109.
I would call - not email, talk directly to someone. Bullet is a good start, and I would also try Isky.
I called ISKY yesterday asking about a cam. The guy I talked to was very helpful until I figured out he thought I was asking about a 70's LT-1. Then he was totally off. As far as he knew they didn't make cams for 95 LT1's?
Been cam shopping and am appalled at the lack of knowledge the people that answer the phones are graced with. After a few minutes on the phone I'm ready to call the next company on my list.
Al 95 Z28
Been cam shopping and am appalled at the lack of knowledge the people that answer the phones are graced with. After a few minutes on the phone I'm ready to call the next company on my list.
Al 95 Z28
Thread Starter
10 Second Club
Joined: Oct 2007
Posts: 2,630
Likes: 28
It just kills me that comp can't make one for me. I mean I find the EXACT cam I want in a solid roller sbc grind from their catalog. Same base circle, same 4/7 swap, lift and duration that will work, and they can't do it because the first 1/2" of the nose is slightly different, lol. Don't they make billet cams? Can't they just program the damn thing to shape the nose for an LT1? WTF.
Contact Steve at LSM Engineering, top quality guy.
http://www.lsmeng.com/
Why on earth do you need a .900 base circle??
http://www.lsmeng.com/
Why on earth do you need a .900 base circle??
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
