Where/how to cut out baffles, RamAir hood.
06-30-2011, 02:48 PM
#1
Where/how to cut out baffles, RamAir hood. I just got a DEAL on a Suncoast Predator hood with airbox ($250! 
) and since my car is not my daily driver and is a 99% good weather only car, I want to cut out the baffles for better air access. Anyone have any tips?
) and since my car is not my daily driver and is a 99% good weather only car, I want to cut out the baffles for better air access. Anyone have any tips? 
07-01-2011, 08:41 AM
#3
TECH Apprentice
iTrader: (1)
Join Date: Jun 2011
Location: Land of the Mormon's although I'm not one of them
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
I did mine with masking tape (For both the edges being cut and to protect the hood from the tools); a body saw, and a dremel/grinder for smoothing things out.
I also moved the gasket from the airbox to the hood; cleaned things up, and gave me a great cutting line to where I needed to cut.
I also moved the gasket from the airbox to the hood; cleaned things up, and gave me a great cutting line to where I needed to cut.
