LT1-LT4 Modifications 1993-97 Gen II Small Block V8

Leaving for the Shootout in about 3 weeks, everybody else ready??

Thread Tools
 
Search this Thread
 
Old 08-23-2011 | 09:44 AM
  #141  
96LT1355Z28's Avatar
10 Second Club
iTrader: (2)
 
Joined: Nov 2007
Posts: 838
Likes: 9
From: Holden, MO (KC)
Default

Originally Posted by joelster
Just fired mine today!

1 little issue so far, should be remedied tomorrow night.
Great news, hope you get it runnin the way you want before headin out!
Old 08-23-2011 | 09:53 AM
  #142  
ZGOBYBY's Avatar
TECH Enthusiast
iTrader: (14)
 
Joined: Dec 2008
Posts: 512
Likes: 1
From: Harrison Township, Michigan
Default

Well, I started working on my GTO on Sunday so I would have a fun car down there Shootout weekend. I started my cam install, and on the last spring, the retainer went flying. It took me about an hour to find that darn thing. Luckily I found it.

We put the cam in as smooth as silk, and wouldn't you know it, I dropped one of the four bolts for that plate that goes over the cam, down into the oil pan. I wanted to shoot myself.

Yesterday I went out outside to the cheeser (the GTO), and drained the oil. Within about 30 seconds, I got the bolt out with a magnet. Thank the lord. It was under that secondary tray under the windage. I lucked out. I was outside yelling "winner, winner, chicken dinner." My neighbors must think I am nuts.

So needless to say, I will be especially happy to make it to the Shootout with at least some mode of transportation.
Old 08-23-2011 | 10:44 AM
  #143  
draggin97s10's Avatar
TECH Fanatic

iTrader: (2)
 
Joined: Mar 2009
Posts: 1,471
Likes: 0
Default

Originally Posted by ZGOBYBY
Well, I started working on my GTO on Sunday so I would have a fun car down there Shootout weekend. I started my cam install, and on the last spring, the retainer went flying. It took me about an hour to find that darn thing. Luckily I found it.

We put the cam in as smooth as silk, and wouldn't you know it, I dropped one of the four bolts for that plate that goes over the cam, down into the oil pan. I wanted to shoot myself.

Yesterday I went out outside to the cheeser (the GTO), and drained the oil. Within about 30 seconds, I got the bolt out with a magnet. Thank the lord. It was under that secondary tray under the windage. I lucked out. I was outside yelling "winner, winner, chicken dinner." My neighbors must think I am nuts.

So needless to say, I will be especially happy to make it to the Shootout with at least some mode of transportation.
Nice you got lucky. Id rather be lucky then stuck taking the oil pan off any day!
Old 08-23-2011 | 12:07 PM
  #144  
quik95lt1's Avatar
Thread Starter
9 Second Club
iTrader: (7)
 
Joined: Dec 2008
Posts: 4,464
Likes: 12
From: Rhode Island
Default

thats beyond lucky........that bolt fell allllll the way down and then actually came out!!! thats awesome..........lucky for the LS motors they are all aluminum so the magnet worked well.......glad to hear it!!! what u put in it for a bumpstick jen?
Old 08-23-2011 | 12:31 PM
  #145  
ZGOBYBY's Avatar
TECH Enthusiast
iTrader: (14)
 
Joined: Dec 2008
Posts: 512
Likes: 1
From: Harrison Township, Michigan
Default

Originally Posted by quik95lt1
thats beyond lucky........that bolt fell allllll the way down and then actually came out!!! thats awesome..........lucky for the LS motors they are all aluminum so the magnet worked well.......glad to hear it!!! what u put in it for a bumpstick jen?
The cam came out of my best friend's father's (rest his soul, he passed in May) GTZ Camaro that SpectreWerks built in a local town nearby. Below is a link of the car:

http://www.superchevy.com/features/c...gtz/index.html

SpectreWerks wouldn't give exact specs, but I know that it's a 112 LSA and around a .530 lift. Nothing insane. I am putting a new chain and oil pump in tonight.

Sorry, that was completely off topic. I feel bad that I won't be able to get my Z there this year. I wanted to at least drive something fun down to the Shootout to be one of the "cool kids" again. LOL... just kidding. I know it's really not about all that. I just can't wait to check out all the rides. Outlaw will be insanity this year.
Old 08-23-2011 | 02:32 PM
  #146  
alan2000T/A's Avatar
10 Second Club

iTrader: (23)
 
Joined: Mar 2004
Posts: 521
Likes: 1
From: NW, Georgia
Default

Originally Posted by Shon Herron
Getting closer!! If we can work thru some last minute issues ThunderChicken will be there!!

BTW-I will have about 10 Oil Pump Drives at the event for $100/each if anyone has been holding out.

Looking forward to the fun!!


Looks like Thunderchicken won't be making an appearance after all based on yesterday's findings. ES/NA looks to be one yellow firebird short of a happy meal...:


Old 08-23-2011 | 02:41 PM
  #147  
Formula383's Avatar
10 Second Club

iTrader: (8)
 
Joined: Feb 2006
Posts: 980
Likes: 0
From: Round Rock, TX
Default

Ouch Alan! Sorry man.
Old 08-23-2011 | 02:47 PM
  #148  
alan2000T/A's Avatar
10 Second Club

iTrader: (23)
 
Joined: Mar 2004
Posts: 521
Likes: 1
From: NW, Georgia
Default

Originally Posted by Formula383
Ouch Alan! Sorry man.
yeah i've been through all the emotions in the last few days. Been working on it a LONG time and now it pops. I've just decided that God has a reason, and i'll focus on the good things and work through it as i can.
Old 08-23-2011 | 03:01 PM
  #149  
Formula383's Avatar
10 Second Club

iTrader: (8)
 
Joined: Feb 2006
Posts: 980
Likes: 0
From: Round Rock, TX
Default

Originally Posted by alan2000T/A
yeah i've been through all the emotions in the last few days. Been working on it a LONG time and now it pops. I've just decided that God has a reason, and i'll focus on the good things and work through it as i can.
I hear ya. I've almost been ready to give up on mine. I'm 8 days from leaving for BG and I still have about 250 miles to put on the new clutch and that can only get done if the slave doesn't leak. The transmission has been in/out of the car 9 times over the last 4 weeks.
Old 08-23-2011 | 03:06 PM
  #150  
alan2000T/A's Avatar
10 Second Club

iTrader: (23)
 
Joined: Mar 2004
Posts: 521
Likes: 1
From: NW, Georgia
Default

Originally Posted by Formula383
I hear ya. I've almost been ready to give up on mine. I'm 8 days from leaving for BG and I still have about 250 miles to put on the new clutch and that can only get done if the slave doesn't leak. The transmission has been in/out of the car 9 times over the last 4 weeks.
man!!! 9 times, geez, you are a trooper. well, that reminds me, even if i could experience a miracle and get the motor back together, there's a brand new clutch sitting behind it that hasn't been broken in...
Old 08-23-2011 | 03:42 PM
  #151  
ZGOBYBY's Avatar
TECH Enthusiast
iTrader: (14)
 
Joined: Dec 2008
Posts: 512
Likes: 1
From: Harrison Township, Michigan
Default

You still attending Alan?
Old 08-23-2011 | 03:55 PM
  #152  
speed_demon24's Avatar
11 Second Club
iTrader: (6)
 
Joined: Dec 2001
Posts: 4,609
Likes: 2
From: Ocala, FL
Default

Originally Posted by alan2000T/A
Looks like Thunderchicken won't be making an appearance after all based on yesterday's findings. ES/NA looks to be one yellow firebird short of a happy meal...:


Ouch . Any idea what caused the detonation? And was it just those 2 cylinders or all 8?
Old 08-23-2011 | 04:09 PM
  #153  
alan2000T/A's Avatar
10 Second Club

iTrader: (23)
 
Joined: Mar 2004
Posts: 521
Likes: 1
From: NW, Georgia
Default

Originally Posted by ZGOBYBY
You still attending Alan?
Shon will be there along w/ some newbies he's rounded up, but i probably won't. I'll be here working on the car.


Originally Posted by speed_demon24
Ouch . Any idea what caused the detonation? And was it just those 2 cylinders or all 8?
several options at this point, so not sure. Its only #7 that got beat. The rest are fine, just dirty.
Old 08-23-2011 | 04:11 PM
  #154  
AChotrod's Avatar
11 Second Club
iTrader: (17)
 
Joined: Jul 2008
Posts: 9,896
Likes: 1
From: Chicago area
Default

Ouch sorry to hear Alan. Still hope to see ya there!
Kyle you put in a Street twin correct? Hell I put mine in and drove it straight to the track. Grabbed like it should and I have NEVER had any chatter or issues from mine. Id say run even if you cant get the 250 in.
Old 08-23-2011 | 04:32 PM
  #155  
Colin91Z's Avatar
TECH Resident
iTrader: (9)
 
Joined: Jun 2005
Posts: 858
Likes: 0
From: Wichita/Derby, KS
Default

Originally Posted by alan2000T/A
Looks like Thunderchicken won't be making an appearance after all based on yesterday's findings. ES/NA looks to be one yellow firebird short of a happy meal...:
Damn that really sucks Alan I was really looking forward to running against you in ES/NA this year since my car didn't make it last year. I can honestly say I know how you feel though, mine motor **** the bed 2-days before we left for last year's shootout. Hope to see you there anyways though!
Old 08-23-2011 | 04:33 PM
  #156  
CamaroRacing12's Avatar
11 Second Club
iTrader: (5)
 
Joined: Apr 2007
Posts: 3,779
Likes: 2
From: Haverhill, Mass
Default

thats a good attitude good luck man
Old 08-23-2011 | 04:39 PM
  #157  
speed_demon24's Avatar
11 Second Club
iTrader: (6)
 
Joined: Dec 2001
Posts: 4,609
Likes: 2
From: Ocala, FL
Default

Originally Posted by alan2000T/A
several options at this point, so not sure. Its only #7 that got beat. The rest are fine, just dirty.
#5 looks pitted too in that pic. Can you post a pic of the whole bank?
Old 08-23-2011 | 04:40 PM
  #158  
SS RRR's Avatar
Village Troll
20 Year Member
iTrader: (2)
 
Joined: Oct 2002
Posts: 11,063
Likes: 546
From: Jackstandican
Default

Originally Posted by quik95lt1
1997........lemme see.....i was 10 years old haha...........maybe he will come out some time this decade again ..........
I had no idea. That explains alot!
Old 08-23-2011 | 04:44 PM
  #159  
AChotrod's Avatar
11 Second Club
iTrader: (17)
 
Joined: Jul 2008
Posts: 9,896
Likes: 1
From: Chicago area
Default

LOL In 97 I was out of HS for a year already. .
Old 08-23-2011 | 05:44 PM
  #160  
Racin96ss's Avatar
10 Second Club
iTrader: (3)
 
Joined: Jan 2007
Posts: 751
Likes: 0
Default

Well....buzz350...Z8 has,supported the shootout every ******* year and your comments suck...get a ******* clue. Chris wants to be there every year *** hole...can't wait to see you there.


Quick Reply: Leaving for the Shootout in about 3 weeks, everybody else ready??



All times are GMT -5. The time now is 04:14 PM.