24x ????
Thread Starter
On The Tree
Joined: Nov 2007
Posts: 134
Likes: 1
From: alabama
24x ???? I have a 96 T/A and am thinking about going to the 24x set up, I am going to be going to the local pull a part and scavaging tomorow and was wanting to know what I could get the pcm and coils out of and any other parts I need to look for to help keep the cost down.
Thanks
Andrew
Thanks
Andrew
Truck Coils - Smaller, Hotter Spark, and Cheaper
Truck Plug Wires - They are longer so if you mount them to your valve covers it will give you some slack to get you running and upgrade down the road.
Coil Harness's - Make sure you cut the other side of the harness so you have both sides of the connectors!
PCM - 411 is most common.
PCM Bracket Tray.
Truck Plug Wires - They are longer so if you mount them to your valve covers it will give you some slack to get you running and upgrade down the road.
Coil Harness's - Make sure you cut the other side of the harness so you have both sides of the connectors!
PCM - 411 is most common.
PCM Bracket Tray.
From what ive read and i could be totally wrong so correct me if i am the truck wires are supposed to be longer. As for the PCM im not totally sure im new to the LSx world but im pretty sure the 411 pcm was a 01-02 Fbody PCM.
most 2001-2002 trucks had the 411 pcm, also the plug wires would have to come from that year range as well. In 2003+ they changed coil styles and started using a shorter plug wire on the trucks.
