LS Coil Placement - Toyota 4 Runner with LT1 EFI 24x Swap
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
http://www.youtube.com/watch?v=qvXlRIiuM1I
Came upon this video and found that this guys placement of the coil packs is a pretty clean looking setup. Im guessing the back plug wires might have to be looped up and over the primaries on a fbody with longtubes. Figured this might get some people thinking and try it out. When i get to putting the rest of mine together i might take a stab at trying it that way just to clean up the engine bay. Only thing i would do different is make the harness bank plug come from the firewall area vs going over the valve covers. The ones i got from my used kit currenty are from green96ta which bolt to the valve cover bolts.
Here's a pic from the kit i got from green96ta when it was on his car...
![](http://i293.photobucket.com/albums/mm48/wildbill_2/108_2075.jpg)
Came upon this video and found that this guys placement of the coil packs is a pretty clean looking setup. Im guessing the back plug wires might have to be looped up and over the primaries on a fbody with longtubes. Figured this might get some people thinking and try it out. When i get to putting the rest of mine together i might take a stab at trying it that way just to clean up the engine bay. Only thing i would do different is make the harness bank plug come from the firewall area vs going over the valve covers. The ones i got from my used kit currenty are from green96ta which bolt to the valve cover bolts.
Here's a pic from the kit i got from green96ta when it was on his car...
![](http://i293.photobucket.com/albums/mm48/wildbill_2/108_2075.jpg)
![](http://i293.photobucket.com/albums/mm48/wildbill_2/108_2076.jpg)