LT4 valve covers and OTVC kit???
LT4 valve covers and OTVC kit??? I did a search but nothing really helpful came up. So can an otcv plug wire kit work with the composite valve covers? If so what does a guy need to make them work together. Thanks guys!
Post a link so we can check it out. Not sure why you think it wont work, its all in you routing it correctly. And having the center bolt wire holders to route them. Good luck and post a picture when your done
Im not worried about the routing of the wires or anything like that. I just wanted to make sure the LT4 bolts and washers will work with the brackets and they wont leak or anything like that. Here is the kit http://www.mcssl.com/store/cc-perfor...0349ca0572b4d3
I have the OTVC wire guides on my LT1 composite valve covers with no issue. I had to use a stainless fender washer between the rubber grommet and the made4you products looms. Works fine.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
TECH Fanatic
Joined: Jun 2007
Posts: 1,255
Likes: 11
From: centerville, ohio
Why cover them up ? Pull them in close to the block from underneath using zip ties and plastic shielding. You can't even see my wires.
Thank you! Thats exactly what I was thinking about doing. I got the OTVC kit last night an was kinda mocking it up seeing what will work. That was my conclusion was to use a stainless washer to help seal those rubber gaskets.
