383 stroker how much spray
#21
#22
12 Second Club
iTrader: (3)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have had 3 cars on tha bottle.
It's a 6speed car
I will do the install myself
And I can pick up kits off of local forums pretty cheap and add a few small things I can get away with between 600-800 I also have a few odds and ends laying around the kit isn't the problem
And I'm going to spray
So how much could I spray safely
I know it has Hastings rings but never wrote down the specs
I'm not asking for much Maby a 175shot
It's a 6speed car
I will do the install myself
And I can pick up kits off of local forums pretty cheap and add a few small things I can get away with between 600-800 I also have a few odds and ends laying around the kit isn't the problem
And I'm going to spray
So how much could I spray safely
I know it has Hastings rings but never wrote down the specs
I'm not asking for much Maby a 175shot
#23
11 Second Club
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Far as heads vs. nitrous bowienut used to run 12.3 boltons, 11.3 on I believe a 150 shot. Then he did an AI heads and cam package and ran like 11.1 pretty quickly and whittled it down to 10.9 NA.
A good heads/cam package is worth more than a 150shot and that is ported GM LT1 heads on a still stock shortblock.
A good heads/cam package is worth more than a 150shot and that is ported GM LT1 heads on a still stock shortblock.
#25
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
What other 3 cars were they? LT1s are not SBCs, they are an entirely different animal. Right now Id bet your "stroker" will huff and puff to put down 330 to the tires, where RamAir95 put down 455 through an auto and a 9". I think you need to take a step back, do some reading, and spend your money wisely.
BTW the car made 391 at the wheels on motor thru a cheap set of shortie headers
#26
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm not asking about expeirence, I'm asking will the
Probe forged flat tops, and eagle sir 6in rods handle a 175shot. With a good tune of course
I will also be running a stand aloan cell with a1000 that I will use for the fuel side of the kit it will be full of racegas
Probe forged flat tops, and eagle sir 6in rods handle a 175shot. With a good tune of course
I will also be running a stand aloan cell with a1000 that I will use for the fuel side of the kit it will be full of racegas