cam swap timing set
#21
Staging Lane
Thread Starter
Join Date: Mar 2012
Location: Morgantown, WV
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Went to put the timing set on tonight and the cam gear hits the water pump gear thats on the drive shaft. My question is can I pull the gear from the shaft so I wont have a hole in my timing cover or remove the whole thing and block the hole in the timing cover? Also I just want to be clear my crank sproket is 12 oclock so my cam sproket is going to be 6oclock right?
Last edited by maromatt; 03-09-2013 at 09:57 PM.
#22
TECH Senior Member
iTrader: (2)
Went to put the timing set on tonight and the cam gear hits the water pump gear thats on the drive shaft. My question is can I pull the gear from the shaft so I wont have a hole in my timing cover or remove the whole thing and block the hole in the timing cover? Also I just want to be clear my crank sproket is 12 oclock so my cam sproket is going to be 6oclock right?