Lid install completed
Thread Starter
Joined: Jan 2005
Posts: 1,475
Likes: 1
From: Munfordville KY
Took quite a bit of grinding on the base, but got the thing installed. Couldn't tell much by sotp, but hopefully it will pick up some when I finally get the car tuned and get to go to the track. Looks like I will finally be running at the ltx shoot out instead of spectating....
I picked up a solid 2 tenths and 1.8 MPH when I did my lid conversion and that was over the Morison cai that was on my Z....... Good job bro.
You will feel the difference on the top end of the track especially with a 6 speed
You will feel the difference on the top end of the track especially with a 6 speed
Thread Starter
Joined: Jan 2005
Posts: 1,475
Likes: 1
From: Munfordville KY
Car is running way to lean right now at wot and I can't get my tunercat to recognize my car to make any adjustments, so right now no testing. I wish I installed my wideband years ago, I think it is one of my favorite mods to this day. And btw mines a 3 speed
I love having a lid on my car as well, I did more trimming to make mine fit but did not use the base either. Make things so much easier to just pop the lid up and take the filter out for cleaning etc.
Thread Starter
Joined: Jan 2005
Posts: 1,475
Likes: 1
From: Munfordville KY
I wanted to keep the base, so I spent a lot of time trimming the base and grinding it. Didn't have to cut on the car at all, which was a major plus. Contemplating taking my ftra off of my 00z and putting on my 94z right now....
Trending Topics
Thread Starter
Joined: Jan 2005
Posts: 1,475
Likes: 1
From: Munfordville KY
That's what I have read for the most part. I have a ftra setup on my ls1 car and picked up a .1 and 1 mph with it over my lid, but am looking at the ssra or chris1313 setup for my lt1 car especially since I deleted my ac





