Losing my mind. Arcing problem
#81
You might just have a burned plug wire dude. That seems to be related to my problem at least. I never had a single problem with this car until I burned a plug wire about 2 years ago, and it's been a little screwed up ever since. I would definitely check everything and make sure one of the wires didn't touch the manifold.
#82
On The Tree
iTrader: (1)
Join Date: May 2009
Location: Ventura, CA
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
I had this problems years ago with a similar set up with you. I tried everything possible and IIRC, there were two things that fixed it. First was that the MSD wire boots were really big and the head from my exhaust actually cooked them and became crispy. Replaced it and fixed that. The other thing that also took car of it is die-electric grease. I put a LOT of that crap on in the boots. It might be hard to snap them on with the grease but make sure you put a lot of that stuff in it. Try it out and let me know how it goes. If it doesn't work I will talk to my dad and see if he recalls what we did to fix it. Let me know
#83
TECH Enthusiast
Thread Starter
iTrader: (6)
Join Date: Sep 2004
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
Ive had 1 person saying remove it all and now you want me to put a bunch on lol My problem is definitely more than just grease. There is a problem lying in there somewhere that needs to be fixed and not masked.
Testing compression next and putting on a random opti i had laying around. Dunno when. I havent touched it in over a month. I dont even want to mess with. Really just want the car gone now hate to say it. lol dont feel like putting up with this problem
Testing compression next and putting on a random opti i had laying around. Dunno when. I havent touched it in over a month. I dont even want to mess with. Really just want the car gone now hate to say it. lol dont feel like putting up with this problem
#84
TECH Enthusiast
Join Date: Aug 2010
Location: New Hampshire
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
OP, does it arch when it turns over but not running?
If it does, start removing stuff from the plugs back till it stops arching?
Just throwing up an idea, no idea what might be the issue.
If it does, start removing stuff from the plugs back till it stops arching?
Just throwing up an idea, no idea what might be the issue.
#85
TECH Enthusiast
Thread Starter
iTrader: (6)
Join Date: Sep 2004
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
pulled off my opti finally. nothing looks bad inside. upon more inspection there is some corrosion forming inside the opti harness itself. now i don't have money for an opti right now so itll be sitting for quite awhile. soon as I get a new harness and opti ill report back and tell you guys whether its opti or not
#86
i've had a problem with persistant arcing all over the place, even after changing plug wires. it was a 4 banger with a distributor. it looked like a lightning storm in the dark.
obviously the first thing i did was try a spare plug wire, which ran a lil' better for a short time, and then started arcing even worse than the old one.
turned out that the gap on a spark plug had filled with shaved ringland material. it eventually burned itself some new gaps in the coil, coil wire, and affected plug wire, and managed to jump them all.
actually ran alright just cruising. it must have been sparking just a tiny bit despite all that mess, enough to keep running till you put load on it.
obviously the first thing i did was try a spare plug wire, which ran a lil' better for a short time, and then started arcing even worse than the old one.
turned out that the gap on a spark plug had filled with shaved ringland material. it eventually burned itself some new gaps in the coil, coil wire, and affected plug wire, and managed to jump them all.
actually ran alright just cruising. it must have been sparking just a tiny bit despite all that mess, enough to keep running till you put load on it.
#87
TECH Enthusiast
Thread Starter
iTrader: (6)
Join Date: Sep 2004
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
Welp, ordered a new optispark, opti harness and put in a new battery. My car seems to be running great now without arcing. I will assume it was the opti but 2 other things were replaced same time. Just thought id update and let everyone know