Where to place electric fuel pressure sender?
#1
Where to place electric fuel pressure sender?
I have a 97 Lt1 that I swapped into a Chevelle, I'm going to be installing pillar gauges and was wondering where to place the sender for the electric fuel pressure gauge. I am using all AN fittings for the fuel system. I have purchased a fuel pressure AN fitting from jegs. I want to to know the best place to put it. Here is the fitting.
http://www.jegs.com/i/JEGS-Performan...00520/10002/-1
Should this be placed close to the fuel rail or anywhere after the filter on the feed side? I never ran an electric fuel gauge and not sure where this belongs to get the correct reading.
Thanks for any help.
Clint
http://www.jegs.com/i/JEGS-Performan...00520/10002/-1
Should this be placed close to the fuel rail or anywhere after the filter on the feed side? I never ran an electric fuel gauge and not sure where this belongs to get the correct reading.
Thanks for any help.
Clint
Last edited by Burkey426; 03-15-2016 at 11:13 AM. Reason: Fixing link