Long Time Coming: 302 LT1
02-13-2024, 09:05 AM
#22
I'm hoping to get it in the car next weekend. Shipping delays plus dealing with getting the in-laws into a smaller house have been killer. Settlement on their new house is today, actually.
However, I did get the coil packs mounted and plug wires made up.
I also had to pick up some offset dowels to align the bellhousing.
However, I did get the coil packs mounted and plug wires made up.
I also had to pick up some offset dowels to align the bellhousing.
The following users liked this post:
Mad302! (02-14-2024)
03-27-2024, 08:03 PM
#25
TECH Fanatic
Thread Starter
Sorry, forgot to update this:
She made 321/267 and then I started having some instability beyond 7k. Overall, I'm pretty happy with the results and I know there is more on tap once I figure out the stability issues. What I'm not happy about, however, is that the throwout bearing got over-extended on the third drive. As a result, the car has sat for almost a year as I have no had the time or desire to tear the thing apart to get to it.
She made 321/267 and then I started having some instability beyond 7k. Overall, I'm pretty happy with the results and I know there is more on tap once I figure out the stability issues. What I'm not happy about, however, is that the throwout bearing got over-extended on the third drive. As a result, the car has sat for almost a year as I have no had the time or desire to tear the thing apart to get to it.
03-28-2024, 12:03 PM
#27
TECH Fanatic
Thread Starter
The headers are Sanderson shorties that exit into 2.5 pipes. They merge into a single 3" pipe from there with a Magnaflow 5" round muffler underneath and larger Magnaflow oval muffler right before the exhaust tip.
03-28-2024, 08:10 PM
#28
Launching!
Sorry, forgot to update this:
https://www.youtube.com/watch?v=XMZ_VK6arBw
She made 321/267 and then I started having some instability beyond 7k. Overall, I'm pretty happy with the results and I know there is more on tap once I figure out the stability issues. What I'm not happy about, however, is that the throwout bearing got over-extended on the third drive. As a result, the car has sat for almost a year as I have no had the time or desire to tear the thing apart to get to it.
https://www.youtube.com/watch?v=XMZ_VK6arBw
She made 321/267 and then I started having some instability beyond 7k. Overall, I'm pretty happy with the results and I know there is more on tap once I figure out the stability issues. What I'm not happy about, however, is that the throwout bearing got over-extended on the third drive. As a result, the car has sat for almost a year as I have no had the time or desire to tear the thing apart to get to it.
cool now throw boost at it or sb2 head it.
The following users liked this post:
LTX (03-29-2024)