reground cam question
08-26-2004, 04:26 PM
#1
Staging Lane
Thread Starter
Join Date: Jul 2004
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
reground cam question I've got an LT1 cam that was reground to LT4 hot cam specs. This was done by reducing the size of the base circle and changing the shape of the lobes to generate the correct duration. I didn't do this myself but got the cam very cheap. The base circle for the intake was reduced .043" and the exhaust .031"
My question is about the push rods.
Can I use the stock length push rods?
ZCarGuy
My question is about the push rods.
Can I use the stock length push rods?
ZCarGuy
08-26-2004, 04:38 PM
#2
On The Tree
I don't know for sure but I would seem to lean agains't it since. You can always order a length checker and do it that way.
Rich
Rich
Originally Posted by zcarguy
I've got an LT1 cam that was reground to LT4 hot cam specs. This was done by reducing the size of the base circle and changing the shape of the lobes to generate the correct duration. I didn't do this myself but got the cam very cheap. The base circle for the intake was reduced .043" and the exhaust .031"
My question is about the push rods.
Can I use the stock length push rods?
ZCarGuy
My question is about the push rods.
Can I use the stock length push rods?
ZCarGuy
