These Vavle covers
These Vavle covers Anybody Have the Valve covers?
They are 2" taller, only the question is will they clear the Back of the Altenators on our cars?
EDL-4246
http://store.summitracing.com/defaul...t+valve+covers
They are 2" taller, only the question is will they clear the Back of the Altenators on our cars?
EDL-4246
http://store.summitracing.com/defaul...t+valve+covers
Actually, I like these better!
http://www.jegs.com/cgi-bin/ncommerc...74&prmenbr=361
If you look in your Jegs magazine they sell them in the LT1/LS1 section. Youd think they were already modified, but it doesnt look like it in the picure.
http://www.jegs.com/cgi-bin/ncommerc...74&prmenbr=361
If you look in your Jegs magazine they sell them in the LT1/LS1 section. Youd think they were already modified, but it doesnt look like it in the picure.
Originally Posted by Birdie2000
I've got some polished B&B ones with alternator clearance for sale. They won't clear a stud girdle, but are plenty tall for the rockers. 
Can you post some pics are Email them to brent@swbrickandfireplace.com
Thanks
Brentt
Looking for $100 w/ oil cap, 1 K&N breather on each, and Felpro blue silicone rubber gaskets RTV'd to the cover, and allan head bolts.
http://community.webshots.com/album/97448604fZpkMR/1
There are pictures of the notched side here. I don't have much time today and only had enough time to give one cover a quick rub out, they've been used for mock up only and had/have some greasy fingerprints on them. I can get a pic of the other cover if you want, but it's basically the same with no notch, and a factory oil cap opposite the breather.
http://community.webshots.com/album/97448604fZpkMR/1
There are pictures of the notched side here. I don't have much time today and only had enough time to give one cover a quick rub out, they've been used for mock up only and had/have some greasy fingerprints on them.
I can get a pic of the other cover if you want, but it's basically the same with no notch, and a factory oil cap opposite the breather.
Originally Posted by Birdie2000
Looking for $100 w/ oil cap, 1 K&N breather on each, and Felpro blue silicone rubber gaskets RTV'd to the cover, and allan head bolts.
http://community.webshots.com/album/97448604fZpkMR/1
There are pictures of the notched side here. I don't have much time today and only had enough time to give one cover a quick rub out, they've been used for mock up only and had/have some greasy fingerprints on them. I can get a pic of the other cover if you want, but it's basically the same with no notch, and a factory oil cap opposite the breather.
http://community.webshots.com/album/97448604fZpkMR/1
There are pictures of the notched side here. I don't have much time today and only had enough time to give one cover a quick rub out, they've been used for mock up only and had/have some greasy fingerprints on them.
I can get a pic of the other cover if you want, but it's basically the same with no notch, and a factory oil cap opposite the breather.Trending Topics
Thats funny, I just found those on Ebay for sale and bought the exact same set before you even posted. Total shipped to my door was $101 although I dont think it included the breather or gaskets.
I am curious now why your getting rid of them though, did they seal good?
http://cgi.ebay.com/ebaymotors/ws/eB...category=33627
I am curious now why your getting rid of them though, did they seal good?
http://cgi.ebay.com/ebaymotors/ws/eB...category=33627
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Teching In
Joined: Jan 2005
Posts: 4
Likes: 0
From: Plaesant hill, CA
I hope you guys find this useful. It is an easy mod and you can use just about any valve covers you want, it would seem. http://web.camaross.com/forums/showthread.php?t=218821 
Joined: Nov 2001
Posts: 10,023
Likes: 6
From: LT1 land...the "409" of the 90s!
Originally Posted by robs97z28
I hope you guys find this useful. It is an easy mod and you can use just about any valve covers you want, it would seem. http://web.camaross.com/forums/showthread.php?t=218821
Originally Posted by Birdie2000
Looking for $100 w/ oil cap, 1 K&N breather on each, and Felpro blue silicone rubber gaskets RTV'd to the cover, and allan head bolts.
http://community.webshots.com/album/97448604fZpkMR/1
There are pictures of the notched side here. I don't have much time today and only had enough time to give one cover a quick rub out, they've been used for mock up only and had/have some greasy fingerprints on them. I can get a pic of the other cover if you want, but it's basically the same with no notch, and a factory oil cap opposite the breather.
http://community.webshots.com/album/97448604fZpkMR/1
There are pictures of the notched side here. I don't have much time today and only had enough time to give one cover a quick rub out, they've been used for mock up only and had/have some greasy fingerprints on them.
I can get a pic of the other cover if you want, but it's basically the same with no notch, and a factory oil cap opposite the breather.