Machinist on crack?!
#21
On The Tree
Join Date: Sep 2004
Location: J-VILLE FL
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by ricknbird350
you cant bolt ls1 head on an lt1 they are a completly different setup the head disign was changed alot...id like to see him do that to you car...
bottom line is this Guy sounds like he knows just enough to be dangerous.
#23
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by BOTTLEDZ
He might have been talking about the first Gen sbc Vortech heads that came on most the late 90's chevrolet trucks. A guy thats local to my area said he can take a set of those and make them out flow just about any thing on the market. they will work on the Lt1 block you just have to mod it to fit the intake.
bottom line is this Guy sounds like he knows just enough to be dangerous.
bottom line is this Guy sounds like he knows just enough to be dangerous.
![Rolleyes](https://ls1tech.com/forums/images/smilies/LS1Tech/rolleyes.gif)
As for out flowing an LT1 head, thats debatable as the vortech heads are based on the LT1 iron head design and flow about the same.
ZcarGuy
#25
On The Tree
Join Date: Sep 2004
Location: J-VILLE FL
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by zcarguy
You have to do more than mod the intake, you also have to convert them to the reverse cooling setup.
As for out flowing an LT1 head, thats debatable as the vortech heads are based on the LT1 iron head design and flow about the same.
ZcarGuy
![Rolleyes](https://ls1tech.com/forums/images/smilies/LS1Tech/rolleyes.gif)
As for out flowing an LT1 head, thats debatable as the vortech heads are based on the LT1 iron head design and flow about the same.
ZcarGuy
![Icon Rolleyes](https://ls1tech.com/forums/images/smilies2/icon_rolleyes.gif)
As far ar the vortec heads being based on the lt1 head Well then no wonder why they won't just bolt on!
#26
12 Second Club
iTrader: (1)
Join Date: Dec 2003
Location: Cleveland, Georgia
Posts: 3,027
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by BOTTLEDZ
Whats up with the ![Icon Rolleyes](https://ls1tech.com/forums/images/smilies2/icon_rolleyes.gif)
As far ar the vortec heads being based on the lt1 head Well then no wonder why they won't just bolt on!
![Icon Rolleyes](https://ls1tech.com/forums/images/smilies2/icon_rolleyes.gif)
As far ar the vortec heads being based on the lt1 head Well then no wonder why they won't just bolt on!
#29
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by BOTTLEDZ
Whats up with the ![Icon Rolleyes](https://ls1tech.com/forums/images/smilies2/icon_rolleyes.gif)
As far ar the vortec heads being based on the lt1 head Well then no wonder why they won't just bolt on!
![Icon Rolleyes](https://ls1tech.com/forums/images/smilies2/icon_rolleyes.gif)
As far ar the vortec heads being based on the lt1 head Well then no wonder why they won't just bolt on!
![Icon Rolleyes](https://ls1tech.com/forums/images/smilies2/icon_rolleyes.gif)
The vortec intake, exhaust and combustion chamber designs are based on the iron LT1 head (which flows better than the aluminum head BTW). Thats why I made the statement about the vortec head being based on the iron LT1 head, not because they are fully compatible with each other. The same thing as stated above goes for bolting LT1 heads to a standard SBC. You do that, start it up and pretty soon it'll overheat big time because no coolant is flowing.
ZcarGuy
#31
TECH Fanatic
iTrader: (10)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
DAAAAAMN!!!!!!
I just read through this thread and could not believe this.
I have been working with cyl heads for many years and have done my share of porting. Dude, I would go back and kick this guys ***. But the truth is, there are so many of these guys out there, it's unreal. My profession requires me to move every couple of years and everytime I move I have to find new, reputible shops. I run into alot of this stuff. If you talk to enough ppl, you will get pros and cons for EVERY shop out there.
Zcarguy, you da man. I'm glad someone pointed out about the iron head being the preceding design for the vortech.
My suggestion would be mail order. You have no one close so your stuck with mail order. Plus, places like Patriot, LE, etc. You're getting high quality products.
Go back and tell this "machinist" all the car lover world says he's a f^(kin MORON.
I just read through this thread and could not believe this.
I have been working with cyl heads for many years and have done my share of porting. Dude, I would go back and kick this guys ***. But the truth is, there are so many of these guys out there, it's unreal. My profession requires me to move every couple of years and everytime I move I have to find new, reputible shops. I run into alot of this stuff. If you talk to enough ppl, you will get pros and cons for EVERY shop out there.
Zcarguy, you da man. I'm glad someone pointed out about the iron head being the preceding design for the vortech.
My suggestion would be mail order. You have no one close so your stuck with mail order. Plus, places like Patriot, LE, etc. You're getting high quality products.
Go back and tell this "machinist" all the car lover world says he's a f^(kin MORON.
#32
11 Second Club
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
There are a lot of people with careers in the automotive feild that don't know jack. It is just a job to them and too few people take pride in their work these days, combine that with the lack of true knowledge among enthusiasts and the weeds never get sorted out. Most of that guys customers probably do a cam at the same time as the heads, he could spend lots of time and not improve flow then when they people get a power boost from bolting in the cam and on the heads they think they did OK, when all of the power may have come from the cam, they don't know.
When I go to the race track be it dirt oval or drags I am amazed at how little most of the people know, even guys that assemble their own motors. I know a guy that used to run a single digit drag car then dirt track cars for a combined time of over 20 years and assembled a lot of his own engines and he tried to tell me that on the 383 in his sons dirt track car they increased the stroke by using longer rods! I try not to talk cars with him anymore, our wives are good friends though so it is hard to avoid.
When I go to the race track be it dirt oval or drags I am amazed at how little most of the people know, even guys that assemble their own motors. I know a guy that used to run a single digit drag car then dirt track cars for a combined time of over 20 years and assembled a lot of his own engines and he tried to tell me that on the 383 in his sons dirt track car they increased the stroke by using longer rods! I try not to talk cars with him anymore, our wives are good friends though so it is hard to avoid.
#36
On The Tree
Join Date: Jan 2005
Location: jackassville Florida
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
LOL Maybe HIS heads never made 400 RWHP on a stock bottom end LT1. I like how stalls dont help, I mean they only throw you into your torque curve/peak. Shoulda asked him how much he'd charge for a muffler bearing change and some blinker fluid.