94 4l60e in my 97?
Yeah, i'm keepin my 3200, and i already sold my racing edge 3800 too. If its gonna work, i'm gonna pick up the tranny tomorrow and start installin it around 5 probably. You should come by and help 
I am not clear enough on what has to be done to feel confident in handing out the needed mods but can say that the 94 tranny is not PWM and the 95+ trannies all are to some degree, the wiring differences have to do with that, the 94 has no PWM to control so it lacks the wiring.
Trending Topics
Hrm, guess that would make my pcm go crazy when it tried to lock the converter, heh. I need to find out what I can do to make it work, and if its even worth my time.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo The VSS noted on the other forum was a good point as well. These guys might be able to help http://www.geocities.com/shaneacobb/...?1124690586549 tell Shane I sent you and he will be able to help.
Ok, so heres the list of problems from what i've heard.
-No pwm, so wiring is different., not sure how to fix it
-Vss, so if i put my tailshaft from my 97, it will fix that.
-Different input shaft? That means my converter from my 97 won't work i take it.
I had a guy on cz28.com tell me 94's will just not work because of they didn't have PWM, so i guess i'm outta luck on this one.
-No pwm, so wiring is different., not sure how to fix it
-Vss, so if i put my tailshaft from my 97, it will fix that.
-Different input shaft? That means my converter from my 97 won't work i take it.
I had a guy on cz28.com tell me 94's will just not work because of they didn't have PWM, so i guess i'm outta luck on this one.
Last edited by matrik; Oct 9, 2005 at 02:11 AM.
