Will it work? I have a 97 obdII and i want to put a 4l60e from a 94. Will i have any problems?

 

Are you keeping the stall still, the 3200 that is. I don't see what the problem of using a 94 tranny, but I'm probably wrong.

 

Yeah, i'm keepin my 3200, and i already sold my racing edge 3800 too. If its gonna work, i'm gonna pick up the tranny tomorrow and start installin it around 5 probably. You should come by and help

 

Where you pickin it up from, and where you gonna be putting it in?

 

There are PWM differnces and wiring differences. It can be made to work but is not a 100% dropin

 

What would need to be done exactly? I'm picking it up from chesepeake, and i'll be puttin it in at my house.

 

I am not clear enough on what has to be done to feel confident in handing out the needed mods but can say that the 94 tranny is not PWM and the 95+ trannies all are to some degree, the wiring differences have to do with that, the 94 has no PWM to control so it lacks the wiring.

 

Hrm, guess that would make my pcm go crazy when it tried to lock the converter, heh. I need to find out what I can do to make it work, and if its even worth my time.

 

The VSS noted on the other forum was a good point as well. These guys might be able to help http://www.geocities.com/shaneacobb/...?1124690586549 tell Shane I sent you and he will be able to help.

 

the input shaft on the 94's are different from 95 and up 4l60's

 

Ok, so heres the list of problems from what i've heard.

-No pwm, so wiring is different., not sure how to fix it
-Vss, so if i put my tailshaft from my 97, it will fix that.
-Different input shaft? That means my converter from my 97 won't work i take it.

I had a guy on cz28.com tell me 94's will just not work because of they didn't have PWM, so i guess i'm outta luck on this one.