'95 z28 problem starting...

Reply Subscribe

Thread Tools

Search this Thread

Feb 14, 2006 | 05:59 PM

CaFFeineSouLja

Thread Starter

Teching In

Joined: Feb 2006

Posts: 2

Likes: 0

'95 z28 problem starting...

well I just recently bought a 95 z28 that had head gasket replaced and yesterday i went to the store and came back out and tried to start the car. It kept turning over and wouldn't start so i gave it a minute and then started up fine. Just went to work today and when i got to the parking lot the engine shut off and I tried turning it over and it wouldn't start. Pushed it into the parking spot and came back outside later and it started right up. Any ideas why it would be doing this?

Feb 14, 2006 | 06:18 PM

96formulaM6

Staging Lane

iTrader: (1)

Joined: Feb 2006

Posts: 50

Likes: 0

From: Derby

that sounds like what my car is doing,

Feb 14, 2006 | 06:25 PM

CodyB4C

On The Tree

Joined: Jun 2005

Posts: 105

Likes: 0

From: Houston

Mine was doing about the same thing. It ended up being a loose wire connection at the starter.

Feb 14, 2006 | 08:09 PM

96formulaM6

Staging Lane

iTrader: (1)

Joined: Feb 2006

Posts: 50

Likes: 0

From: Derby

have u put yours on a computer, mine was throwing out codes, like a mis fire, and o2 sensor, and egr valve.

Feb 14, 2006 | 08:47 PM

redhot lt-1

Launching!

iTrader: (2)

Joined: Dec 2005

Posts: 275

Likes: 0

From: sumter,sc

i`ve had the same problem first turn it over it wouldn`t crank for the world hit it the second time fires right up a friend of mine is a ford man (poor soul) said he has seen it before and said he believes that it`s in the fuel system as it gets older the feul pump or regulator isn`t working up to par

Reply Subscribe