10's!!
10's!! LOL, went to BMP and on the first run I blew the tires off spraying out of the hole. So Gator suggested activating the spray at about 15 feet.
Next run I got this:
60ft 1.60
1/8 7.0 @ 98mph
10.996 @ 122.28
I was so fuggin happy that I barely celebrated, lol!
3rd run i missed the n20 button and had to swipe it late resulted in a 11.01 @ 121 mph.
I have to get a lot more seat time, I also need to learn when I can hit the spray, love to ride it outta the hole. I think even with this huge 75 shot I could tun a 10.8 maybe a 10.7 with everything going right.
__________________
Next run I got this:
60ft 1.60
1/8 7.0 @ 98mph
10.996 @ 122.28
I was so fuggin happy that I barely celebrated, lol!
3rd run i missed the n20 button and had to swipe it late resulted in a 11.01 @ 121 mph.
I have to get a lot more seat time, I also need to learn when I can hit the spray, love to ride it outta the hole. I think even with this huge 75 shot I could tun a 10.8 maybe a 10.7 with everything going right.
__________________
TECH Fanatic
Joined: Oct 2003
Posts: 1,101
Likes: 0
if you can figure it out i'd pay ya. lol
no clue, been doing that for the past 3-4 years...
went through 3 sets of valve springs, 2 cams, 2 heads, 3 optis, 2 ignition boxes, 3 coils, 1 opti harness, 1 set of injectors, fuel pump... basicly everything electrical or fuel related...
the only thing that i havent tried is a new wiring harness, and a new bottom end
why are you running your nitrous with a button?
no clue, been doing that for the past 3-4 years...
went through 3 sets of valve springs, 2 cams, 2 heads, 3 optis, 2 ignition boxes, 3 coils, 1 opti harness, 1 set of injectors, fuel pump... basicly everything electrical or fuel related...
the only thing that i havent tried is a new wiring harness, and a new bottom end
why are you running your nitrous with a button?
nice numbers and thats pretty sweet for a 75 shot. do you have a 12 bolt or are you still running the 10 bolt?
blkchevyz- a friend of mine with a 383 AFR headed LT1 with spray has the same problem. it has been setup for nitrous with a 224/236 cam and runs perfect N/A then when he hits the spray it just misses up top real bad. on motor he runs 12.05@112 and with a 150 he cant get a full problem free run but has gone 11.4@123. he's gone through every ignition and electrical part but to no success.
blkchevyz- a friend of mine with a 383 AFR headed LT1 with spray has the same problem. it has been setup for nitrous with a 224/236 cam and runs perfect N/A then when he hits the spray it just misses up top real bad. on motor he runs 12.05@112 and with a 150 he cant get a full problem free run but has gone 11.4@123. he's gone through every ignition and electrical part but to no success.
Originally Posted by blkchevyz
if you can figure it out i'd pay ya. lol
no clue, been doing that for the past 3-4 years...
went through 3 sets of valve springs, 2 cams, 2 heads, 3 optis, 2 ignition boxes, 3 coils, 1 opti harness, 1 set of injectors, fuel pump... basicly everything electrical or fuel related...
the only thing that i havent tried is a new wiring harness, and a new bottom end
why are you running your nitrous with a button?
no clue, been doing that for the past 3-4 years...
went through 3 sets of valve springs, 2 cams, 2 heads, 3 optis, 2 ignition boxes, 3 coils, 1 opti harness, 1 set of injectors, fuel pump... basicly everything electrical or fuel related...
the only thing that i havent tried is a new wiring harness, and a new bottom end
why are you running your nitrous with a button?
I can't even imagine what the problem is when you have replaced about everything already.. lol..
Trending Topics
why are you running your nitrous with a button?
it's actually set for WOT switch and windowed for 3800-6600 but it was spinning outta the hole so i used the activation button to delay it.
it's actually set for WOT switch and windowed for 3800-6600 but it was spinning outta the hole so i used the activation button to delay it.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
TECH Fanatic
Joined: Oct 2003
Posts: 1,101
Likes: 0
yeah i've datalogged it many times... all i see is the rpms dropping.
http://www.mofbody.com/blkchevyz/chsheads.jpg
thats what the miss looks like on the dyno
i've redone the valve many many times... i figured the odds are i would of got it right one of the times.
plugs have been gapped from 45 to 35.
i think the set i have now is at 40
cams a 234 242 600 600 112
sorry for hijacking your thread
**** get the traction worked out and launch that car on the bottle
http://www.mofbody.com/blkchevyz/chsheads.jpg
thats what the miss looks like on the dyno
i've redone the valve many many times... i figured the odds are i would of got it right one of the times.
plugs have been gapped from 45 to 35.
i think the set i have now is at 40
cams a 234 242 600 600 112
sorry for hijacking your thread
**** get the traction worked out and launch that car on the bottle
Outlaw hurry up and get yours done so we can see a big dawg lt1.
Ray, come out some time it always fun to have 2 fast lt1's. by the way this run was against a ls1 that was looking for his 1'st 10 second pass also. He did not get it and lost to the lt1, he did not appear happy.
BLK, wow yeah thats a big dip at 5700 rpms?? Odd?
Ray, come out some time it always fun to have 2 fast lt1's. by the way this run was against a ls1 that was looking for his 1'st 10 second pass also. He did not get it and lost to the lt1, he did not appear happy.
BLK, wow yeah thats a big dip at 5700 rpms?? Odd?
Originally Posted by LT14LIFE JT
Way to go, 97blkz...Get your issues straightened out and get a 200 shot and let's see a 9 second LT1 street car! 
TECH Fanatic
Joined: Feb 2006
Posts: 1,119
Likes: 0
Originally Posted by blkchevyz
yeah i've datalogged it many times... all i see is the rpms dropping.
http://www.mofbody.com/blkchevyz/chsheads.jpg
thats what the miss looks like on the dyno
i've redone the valve many many times... i figured the odds are i would of got it right one of the times.
plugs have been gapped from 45 to 35.
i think the set i have now is at 40
cams a 234 242 600 600 112
sorry for hijacking your thread
**** get the traction worked out and launch that car on the bottle
http://www.mofbody.com/blkchevyz/chsheads.jpg
thats what the miss looks like on the dyno
i've redone the valve many many times... i figured the odds are i would of got it right one of the times.
plugs have been gapped from 45 to 35.
i think the set i have now is at 40
cams a 234 242 600 600 112
sorry for hijacking your thread
**** get the traction worked out and launch that car on the bottle
Originally Posted by Speed Density
Hey what is the stroke on the motor?
She is your DD right? What MPG are you getting? What stall?
Tony.
She is your DD right? What MPG are you getting? What stall?
Tony.