tuning
Thread Starter
TECH Enthusiast
iTrader: (24)
Joined: Apr 2005
Posts: 538
Likes: 0
From: madisonville ky
tuning any body dealt with carolina auto masters my budy said they do a good job on tuning i need to no bad so i can send my computer off.i talk to bryan at pcm4less very nice guy who should i go with?
TECH Fanatic
Joined: Sep 2002
Posts: 1,112
Likes: 0
From: BLOOMFIELD, NY
I have had a tune done from brian. He does some good work. But dont expect any major changes casue those mail order tunes are not the most detaild for your car. Im sure it will make some improvments as it did for mine when i was only slightly modified. However if you have major mods done go to a dyno !!
Good luck
Good luck
Jeff at CAM is the one tuning my car and I am very happy, used to use BH wont say anything bad about him but wont say the good things I used too anymore.
Mailorder can be great especially IF you have the datalogging software and such to help the tuner out. People get a hardon over the dyno but the dyno rollers are not your car and not all tuners know enough to take a dyno tune and make it a real working track/street tune. Perfect on the rollers will not be perfect on the strip.
Mailorder can be great especially IF you have the datalogging software and such to help the tuner out. People get a hardon over the dyno but the dyno rollers are not your car and not all tuners know enough to take a dyno tune and make it a real working track/street tune. Perfect on the rollers will not be perfect on the strip.
I went with bryan and never do it again.
hes to bussy and takes for ever to get back to me.
heck I finished my motor may 5.
and I'm still trying to get it right but seams that hes to bussy..
alot of problems, won't shift out of 1st. feels like a rubber band when does shift because the pressure is way to high,
one tune fit all.
I guess for $75 bucks what do you expect.
I should have gone to C A M (still might)
hes to bussy and takes for ever to get back to me.
heck I finished my motor may 5.
and I'm still trying to get it right but seams that hes to bussy..
alot of problems, won't shift out of 1st. feels like a rubber band when does shift because the pressure is way to high,
one tune fit all.
I guess for $75 bucks what do you expect.
I should have gone to C A M (still might)
IMO Bryan does good work. I would say like a lot of mail order tunes he gets you 3/4 of the way there. Even with datalogs it cant be 100%. Best way to tune the car is on the street. I'd be very conservative about using data collected on a dyno to full tune your car as Dwayne Mentioned.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo