I'm looking to buy the 305 very soon. I'm an idiot when it comes to looking on their website to hunt it down. Can someone link me?
Also I was going to use this thread for future questions, but I'll try and do all my research first. Thanks

BTW I've done enough research as to the cam I want, so please don't try to persuade me in another direction..

 

Ya, found the cam...

 

Good cam. Thunder racing is having a 10% sale this weekend, so check that out.

http://thunderracing.com/catalog/?ac...&vid=4&pcid=51

Even linked ya!

 

Check this price out...

http://www.texas-speed.com/shop/cate...MID=2&catid=44

 

Same price

 

a custom grind would be your best bet in all honesty. 75$ more for more power throughout the curve, thats an easy decision.

I dont have anything to prove this statement as fact, but most people think the 503 is the better cam when compared to the 305. my buddy ran consisten 12.5's @ 113 with full bolt-ons, nitto's, 4.10's and a 227/233 cam with lift in the .56X range. that would be another option, apparently it has no surge issues either.

I would go a little bigger, because the 305 is not much bigger than the hot cam, and you have 4.10's so you are already set there. get a custom grind, its your best bet, otherwise check out the 227/233, and the cc503.

 

I have a cc305 cam that ill sell ya for 50bucks. Just pulled it out of my car, it has about 6000mi on it. The car went a fastest of 11.7 cam only with this cam. I still have the original cam card also.

 

If you're open to suggestions for other than the cc305, I'd recommend the 503 or 306.

http://www.z28.com/forum/showthread.php?t=79261

 

really like my 503

 

How do you like the XFI high extreme energy Fuel injection cam with .584"/.579 @292/300 duration on the LT1. What do you guys think of this Cam?