View Poll Results: what color
red
![](https://ls1tech.com/forums/images/polls/bar2-l.gif)
![](https://ls1tech.com/forums/images/polls/bar2.gif)
![](https://ls1tech.com/forums/images/polls/bar2-r.gif)
![](https://ls1tech.com/forums/clear.gif)
34
37.36%
low gloss black
![](https://ls1tech.com/forums/images/polls/bar3-l.gif)
![](https://ls1tech.com/forums/images/polls/bar3.gif)
![](https://ls1tech.com/forums/images/polls/bar3-r.gif)
![](https://ls1tech.com/forums/clear.gif)
12
13.19%
super wet black
![](https://ls1tech.com/forums/images/polls/bar4-l.gif)
![](https://ls1tech.com/forums/images/polls/bar4.gif)
![](https://ls1tech.com/forums/images/polls/bar4-r.gif)
![](https://ls1tech.com/forums/clear.gif)
37
40.66%
other.... post up
![](https://ls1tech.com/forums/images/polls/bar5-l.gif)
![](https://ls1tech.com/forums/images/polls/bar5.gif)
![](https://ls1tech.com/forums/images/polls/bar5-r.gif)
![](https://ls1tech.com/forums/clear.gif)
8
8.79%
Voters: 91. You may not vote on this poll
lt1 intake color poll
#24
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm working on an intake for a girl on another board. Hers is gonna be super wet black. The only difference is that I'm sanding all the rough casting down to a nice uniform 240 grit finish so that when the powder is laid down, it'll come out as smooth as the paintjob on the outside of the car, instead of the "lumpy oatmeal" look of an LT4 intake.
If you don't mind putting 15 or so hours into the intake before you send it to the coater, the results are well worth it.
If you don't mind putting 15 or so hours into the intake before you send it to the coater, the results are well worth it.